XR3081XID-F

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Full
Receiver Hysteresis:	25mV
Data Rate:	250kbps
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to XR3081XID-F

The XR3081XID-F is an integrated transceiver and receiver designed for digital communication in a wide range of consumer electronics and industrial control applications. The XR3081XID-F device is composed of four major functional blocks: transceiver, receiver, transmitter, and a configurable FIFO interface. The transceiver is responsible for receiving and transmitting data in a specified format. The receiver is used to process incoming data and convert it into a suitable format for further downstream processing. The transmitter is used to convert data into an outgoing format and place it onto the transmission medium. The FIFO interface is used to control the transmission and reception of data.

Application Fields of XR3081XID-F

The XR3081XID-F is widely used in consumer electronics and industrial control applications. It is used in systems that require reliable data transmission over short or long distances. In consumer electronics, the XR3081XID-F is often used in applications such as wireless routers, set top boxes, digital video recorders, cable modems, and multi-room audio systems. In industrial control applications, the XR3081XID-F is typically used in the management of control systems, monitoring systems, data acquisition systems, and industrial automation.

Working Principle of XR3081XID-F

The XR3081XID-F transceiver and receiver operates using the two-wire half duplex protocol. This protocol requires a dedicated transmitter and receiver, with each end of the communication link connected to the other end through a shared transmission medium. The XR3081XID-F transceiver is responsible for encoding and decoding data, as well as handling the flow control. The XR3081XID-F receiver is responsible for interpreting the incoming data and sending its output to the appropriate receiver.The XR3081XID-F transceiver and receiver supports both synchronous and asynchronous communication modes. In synchronous mode, the transmission of data is timed with a constant frequency, allowing for reliable transmission of data between both ends. Asynchronous mode allows for variable data transfer rates, as well as variable interrupt handling.The XR3081XID-F also utilizes a data formatting method called Forward Error Correction (FEC). This method allows for the transmission of multiple, redundant pieces of data, allowing for a higher degree of accuracy and reliability in data transmission. This capability is important for applications that require high speed or low latency data transfer.

Conclusion

The XR3081XID-F is a reliable, integrated transceiver and receiver solution for a variety of consumer electronics and industrial control applications. Its two-wire half duplex protocol allows for reliable and accurate data transfer in both synchronous and asynchronous modes. Its Forward Error Correction (FEC) data formatting method provides a higher level of protection against data corruption and other errors. With its wide range of applications, the XR3081XID-F is a popular choice for many consumer and industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description