XR68C192CJ-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XR68C192CJ-F is one of the most established and widely utilized UARTs (Universal Asynchronous Receiver Transmitter) currently available in the market. It is a popular, yet versatile data communications interface developed by XR Microsystems, Inc. It is commonly used to interface serial devices with computers, microcontrollers, routers, and networked embedded systems.

The XR68C192CJ-F supports full-duplex UART functions and asynchronous data transmission. It operates in 8 data bits, no parity mode with an adjustable transmission speed of up to 115,200 baud with buffered input and output which allows for faster, more reliable data transfer rates. Additionally, the XR68C192CJ-F provides handshaking signals (DTR, DSR, RTS and CTS) to perform flow control for better data integrity and efficient processing.

The application field of the XR68C192CJ-F is quite extensive. It is suitable for use in point-of-sale systems, flight simulators, robotics, industrial control and medical applications. It can also be used in educational and entertainment applications. The XR68C192CJ-F is a popular choice for many embedded applications and is compatible with 3.3/5 Volts CMOS/TTL/LVTTL logic, hence making it suitable for a wide range of applications.

The working principle of the XR68C192CJ-F revolves around asynchronous serial data transmission. In a standard serial port setup, the host computer is connected to a device, such as a modem, via the UART. Data is then transferred at a predetermined rate of speed that is agreed upon between the two devices. When a computer wishes to communicate with a modem, for example, it will signal the modem with a specific "mark" which allows the modem to know that the signal is from the computer. The modem will then respond with a signal of its own, thus indicating that the sending has begun. Asynchronous serial communication requires the transmission of control signals from the sender to the receiver. These signals indicate when sending and receiving starts and stops.

The transmitter within the XR68C192CJ-F monitors the handshaking line signals (DTR, DSR, RTS, and CTS) to determine whether the lines are ready for communication. Once the hardware is in an acceptable condition, the transmitter will generate a Start bit, which signifies the beginning of transmission of data bits. The transmitted data is then followed by a Stop bit, signaling the end of transmission. Upon receiving the stop bit, the receiver in the XR68C 192CJ-F is enabled and it will start interpreting the received data bits based on the specified format. During the process, the XR68C192CJ-F will also compare the incoming data against the parity bit (if enabled), and will ensure the integrity of the data transmission.

The XR68C192CJ-F is a flexible and reliable UART device which is widely used in many different kinds of applications. It is a highly popular choice due to its wide-ranging compatibility amongst devices, as well as its efficient, cost-effective performance. The XR68C192CJ-F\'s ability to facilitate data transmission and control signals at up to 115.2 kilobits per second ensures fast, reliable data transfer even in the most demanding applications.

The specific data is subject to PDF, and the above content is for reference