XT09-PKI-E-NA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF receivers, transmitters, and transceivers finished units are used in a variety of electronic applications. In particular, the XT09-PKI-E-NA module is especially designed for these applications. The XT09-PKI-E-NA is a highly integrated RF module for use in wideband transceiver applications. This module includes a built-in phase-locked loop (PLL) synthesizer and a frequency synthesizer, as well as support for dual-band operation in 900 (inhibit) and 2400 MHz (allow). The module is capable of high sensitivity and low power consumption, making it a great choice for such applications. The key feature of the XT09-PKI-E-NA is its easy implementation and use in various applications. It integrates an RF low-noise amplifier (LNA), RF signal strength indicator (RSSI), two channel filter, AGC regulator, and integrated PLL to achieve a single chip solution for wideband communication. The RF module is pre-calibrated for optimum performance, and its dedicated PLL provides wide range RF frequency accuracy over a wide range temperature. Also, its RFI rejection capability for offset frequencies is increased, making it ideal for communication systems requiring high rejection of unwanted interference. In terms of its working principle, the XT09-PKI-E-NA module acts as an RF receiver, transmitter, and transceiver. The receiver section of the module consists of an LNA and a RSSI. The LNA is used to amplify the weak RF signals that enter the module. It reduces noise so that the signal-to-noise ratio (SNR) is increased. The RSSI measures the signal strength, which it then transmits to the microcontroller or external system. The transmitter section of the module contains a power amplifier (PA), filter, and AGC between the LNA and the PA, as well as a frequency synthesizer. The frequency synthesizer is used to generate continuous frequency across a wide range. This helps to ensure continuous communication over multiple transmitters. The PA amplifies the signals transmitted from the synthesizer so that they have sufficient power to be received by the receiver. The filter is used to remove any unwanted noise or interference. The AGC is then used to control the output levels of the PA. The transceiver section of the module is responsible for transmitting and receiving RF signals. It is composed of an RF data mux, a receive blend, and an RX and TX switches. The RF data mux is used to switch between different channels of data and provide a single, uniform signal that can be transmitted and received. The receive blend provides a signal balance with the received data. Finally, the RX and TX switches are used to control the data flow between the receiver and the transmitter. Overall, the XT09-PKI-E-NA module is a highly flexible and efficient solution for RF receiver, transmitter, and transceiver finished units. Its single-chip solution provides low power consumption with improved rejection of unwanted interference. The device can also be easily implemented and used in various applications.

The specific data is subject to PDF, and the above content is for reference