Allicdata Part #: | 602-1871-ND |
Manufacturer Part#: |
XTP9B-DPS-001 |
Price: | $ 124.05 |
Product Category: | RF/IF and RFID |
Manufacturer: | Digi International |
Short Description: | 9XTEND REPLACEMENT, P2MP, RPSMA, |
More Detail: | N/A |
DataSheet: | XTP9B-DPS-001 Datasheet/PDF |
Quantity: | 22 |
1 +: | $ 112.77000 |
25 +: | $ 105.72200 |
Serial Interfaces: | UART |
Package / Case: | Module |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Current - Transmitting: | 710mA |
Current - Receiving: | 35mA |
Voltage - Supply: | 2.8 V ~ 5.5 V |
Memory Size: | -- |
Utilized IC / Part: | -- |
Antenna Type: | Not Included, RP-SMA |
Series: | XTend® |
Sensitivity: | -110dBm |
Power - Output: | 30dBm |
Data Rate: | 125kbps |
Frequency: | 902MHz ~ 928MHz |
Modulation: | FSK |
Protocol: | -- |
RF Family/Standard: | General ISM |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.RF transceiver modules are becoming increasingly important for a range of applications that require the transmission of radio waves. The XTP9B-DPS-001 transceiver module is an example of a device that has a wide range of uses in a variety of communication contexts. This article will discuss the application field and working principle of the XTP9B-DPS-001.
The XTP9B-DPS-001 is a low-power, wideband transceiver module designed for use in 2G/2.5G/3G/4G base stations, mobile phones, and mobile data terminals. The module is a compact and convenient solution for wireless communication networks, as it has both receiver and transmitter functions integrated into one unit. It supports the GSM, GPRS, EDGE, WCDMA, LTE, and other digital communication standards.
The XTP9B-DPS-001 is designed for small form factor applications, such as those found in mobile phones, mobile data terminals, and other consumer electronics applications. It features an RF power amplifier with a maximum output power of 33 dBm, which allows for a broad range of applications. It also features a digital-to-analog converter, allowing for easier integration with analog systems. Additionally, the module is designed to be highly energy-efficient, consuming as little as 0.6 W when in full operation.
In terms of its working principle, the XTP9B-DPS-001 uses a synthesizer based on a Frequency Division Duplex (FDD) architecture to enable transmission and reception of data on a single module. The frequency of the synthesizer is controlled by a programmable clock, which allows for flexible frequency allocations and bandwidths. The FDD architecture allows for the transmission of data over a given frequency range, while the receiver receives that data at the same frequency range.
The XTP9B-DPS-001 also features an RF transmitter that is optimized for higher power and more efficient use of available bandwidth. It supports GSM, GPRS, EDGE, WCDMA, LTE, and other digital communication standards, and can be used for data transmission over a variety of applications. The transmitter is also highly efficient, consuming as little as 0.35 W when in full power mode.
The XTP9B-DPS-001 also features a receiver that is optimized for low power and high sensitivity. It is designed to receive data from a wide range of transmitters and has an adjustable receive sensitivity that allows for adjustments to be made in order to improve the performance of the receiver. The receiver is also highly energy-efficient, consuming as little as 0.27 W when in full receive mode.
In summary, the XTP9B-DPS-001 is a powerful and efficient transceiver module designed for use in a variety of communication contexts, from GSM to LTE and other digital communication standards. Its integrated RF power amplifier, digital-to-analog converter, and adjustable receiver sensitivity make it an ideal choice for applications that require low power and high data rate. Its FDD architecture allows for flexible frequency allocations and bandwidths, and its highly efficient design ensures low power consumption. As such, the XTP9B-DPS-001 is an excellent choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
XTP9B-DPM-001 | Digi Interna... | 124.05 $ | 936 | 9XTEND REPLACEMENT, P2MP,... |
XTP9B-DPM-721 | Digi Interna... | 124.05 $ | 389 | XTEND VB AND XBEE XTC MOD... |
XTP9B-DMS-001 | Digi Interna... | 124.05 $ | 116 | 9XTEND REPLACEMENT, DIGIM... |
XTP9B-DPS-001 | Digi Interna... | 124.05 $ | 22 | 9XTEND REPLACEMENT, P2MP,... |
XTP9B-PKI-R | Digi Interna... | 192.65 $ | 65 | XTEND-PKG RFRF |
XTP9B-PKI-RA | Digi Interna... | 207.21 $ | 392 | XTEND-PKG RFRF |
XTP9B-PKC-UA | Digi Interna... | 207.21 $ | 170 | XTEND-PKG RFRF |
XTP9B-PKI-RA-NA | Digi Interna... | 207.21 $ | 129 | XTEND-PKG RFRF |
XTP9B-PKI-RA-NL | Digi Interna... | 207.21 $ | 184 | XTEND-PKG RFRF |
XTP9B-DMM-001 | Digi Interna... | 124.05 $ | 48 | 9XTEND REPLACEMENT, DIGIM... |
XTP9B-DPS-721 | Digi Interna... | 124.05 $ | 17 | XTEND VB AND XBEE XTC MOD... |
2.4GHz transceiver, 64MHz Arm Cortex M4F...
ENET-ZBP113 ZIGBEE MODULE
RF TXRX MODULE ISM>1GHZ U.FL ANT
RF TXRX MOD BLUETOOTH/WIFI U.FL
RF TXRX MOD CELLULAR/NAV U.FL
RF TXRX MODULE ISM ...