Series:	VTA
Packaging:	Bulk
Part Status:	Active
Resistance:	700 Ohms
Tolerance:	±0.1%
Power (Watts):	0.667W, 2/3W
Composition:	Metal Foil
Features:	Non-Inductive
Temperature Coefficient:	±8ppm/°C
Operating Temperature:	-55°C ~ 125°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 0.750" L (9.53mm x 19.05mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors Y0029700R000B0L Application Field and Working Principle

Introduction

Through hole resistors are some of the most common pieces of electronic equipment. They are used in a very wide variety of electronics applications, from very basic ones such as radios to highly sensitive scientific instruments. The Y0029700R000B0L is a type of through hole resistor which has been designed for extremely precise and accurate measurement of electrical resistances. This article aims to provide an overview of the application field and working principle of the Y0029700R000B0L through hole resistor.

Application Field

The Y0029700R000B0L is an especially precise and accurate through hole resistor which has been designed to be used in industrial, scientific, and research applications. It is an excellent choice for any project requiring high precision as it has a very low tolerance of up to 0.01% and an extremely low temperature coefficient of <50 ppm/°C. It is often used in applications such as monitoring temperature in industrial ovens, measuring the accuracy of automated optical inspection systems, and in the production of medical devices and laboratory equipment, due to its excellent accuracy and temperature stability. The Y0029700R000B0L is also suitable for use in high frequency applications, such as in the 3D printing industry, as it is able to maintain its accuracy up to around 1GHz.

Working Principle

The working principle of the Y0029700R000B0L through hole resistor is based on Ohm’s Law, which states that the current through a conductor between two points is directly proportional to the voltage across the two points. This means that if the voltage across the two points is known, the current through them can be calculated. The Y0029700R000B0L is composed of two electrodes, one on each end of the resistor. When a voltage is applied to the two electrodes, they form an electrical circuit. The two electrodes create a resistance which limits the current flow. The amount of resistance is directly proportional to the material of which it is made of, as well as its physical dimensions. This resistance is measured in Ohms. The Y0029700R000B0L is made from extremely high purity metal alloys, such as nickel and copper, in order to achieve its exceptionally low tolerance of up to 0.01% and its extremely low temperature coefficient of <50 ppm/°C. This makes it suitable for industrial and scientific applications which require highly precise and accurate measurements.

Conclusion

The Y0029700R000B0L is a type of through hole resistor designed for excellent accuracy and temperature stability. It is commonly used in industrial ovens, automated optical inspection systems, medical devices, laboratory equipment and 3D printing applications. Its accuracy is provided by the use of high purity metal alloys, such as nickel and copper, which create an electrical resistance which is calculated in Ohms. This article has provided an overview of the application field and working principle of the Y0029700R000B0L through hole resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description