Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through-hole resistor is a type of resistor that makes use of a via or a hole dug through one or more layers in a printed circuit board and was the general type of resistors used in the past but has been largely overcome by the surface mount resistor in modern use. The Y0054164R770T9L resistor is an example of a through-hole resistor.

The Y0054164R770T9L is a through-hole resistor that is capable of withstanding a maximum power dissipation of 0.71W. It has a tolerance of ±5%, a temperature coefficient of ±300 ppm/°C, and a voltage rating of 75V. The resistor has a maximum resistance of 770Ω and is a commonly used component in the making of printed circuit boards.

The main benefit of using through-hole resistors is the fact that these components are easy to install and it does not take too much time to do so. The components also offer a great degree of mechanical stability and durability, thus allowing them to be used in environments with extreme conditions. Additionally, the components have an incredibly low contact resistance, making them ideal for use in signal circuits where there is a need to maintain the integrity of the signal by reducing resistance. The Y0054164R770T9L uses a nickel-plated, tinned-iron alloy construction that allows it to maintain a low contact resistance, thereby increasing the signal integrity of the circuit.

The working principle of a through-hole resistor is relatively simple. It basically works by creating resistance between the two terminals of the resistor, which stops the transfer of electricity from one side of the resistor to the other while allowing energy to be dissipated in the form of heat. To create the resistance, a ceramic material such as a metal oxide or a metal film is inserted between the two metallic terminals. This material then absorbs the electrical current and causes it to be dissipated as heat. This is what helps the resistor to function correctly and remain stable under various conditions.

Through-hole resistors are a very important component in the making of printed circuit boards as they are used for various reasons. They are used to reduce electrical noise, provide a current limiting effect, control the voltage entering a circuit, reduce the power consumption of the circuit, and act as a protection against overcharging or short-circuiting of the circuit. By using the Y0054164R770T9L resistor in such applications, PCB makers can create more reliable and effective products that minimize interference and maximize efficiency.

The specific data is subject to PDF, and the above content is for reference