Y00714K70000T0L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are very common in the electronic industry. A Y00714K70000T0L resistor is one type of through hole resistor used in circuits.

The Y00714K70000T0L Resistor is manufactured as a radial leaded resistor, which is a type of through hole resistor. The measurements for the Y00714K70000T0L resistor are: 0.7W, 14K ohms, tolerances of ±5%, a temperature coefficient of 50ppm/°C, and an operating voltage of 500V. The lead size is 0.6 mm, and the resistor size is 5mm.

The application field for the Y00714K70000T0L resistor is mostly for electronic projects such as amplifiers, signal processors, and any other projects that require a through hole resistor. The resistor should be mounted to the PCB with a mountable radial leaded resistor with through holes large enough to fit the lead wire. The resistor should be secured by soldering the lead wires to the through-hole. The resistor should also be installed in a manner that would prevent it from overheating, due to its high operating voltage.

The working principle for the Y00714K70000T0L resistor is based on Ohm’s Law, which states that the current flowing through any resistor is proportional to the applied voltage. Therefore, the Y00714K70000T0L resistor will limit the current flowing through the circuit, as the applied voltage increases. The resistor will act as a voltage regulator, and reduce the current flowing through the circuit.

The Y00714K70000T0L resistor has been used in many electronic projects due to its reliable performance and accurate reading. Therefore, it is a widely used through hole resistor in the electronic industry. It is important to install a Y00714K70000T0L resistor in an appropriate manner, as it is capable of handling high voltages and currents.

The specific data is subject to PDF, and the above content is for reference