Y00981K50000F9L

Series:	VSA101
Packaging:	Bulk
Part Status:	Active
Resistance:	1.5 kOhms
Tolerance:	±1%
Power (Watts):	0.6W
Composition:	Metal Foil
Features:	Moisture Resistant, Non-Inductive
Temperature Coefficient:	±0.2ppm/°C
Operating Temperature:	-55°C ~ 125°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.260" x 0.102" Rectangular x 0.305" L (6.60mm x 2.59mm x 7.75mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most commonly used components in electrical and electronic circuits. The Y00981K50000F9L resistor is a type of through hole resistor, which is able to resist and stabilize electrical current flow and to dissipate or absorb excess current. This component is typically used to protect and prevent damage to components in a circuit due to too much current flowing through it.The Y00981K50000F9L is a relatively large and durable through hole resistor. It is composed of a resistive element that can be made from different materials, such as ceramics, carbon, and nickel-chromium alloys. This component is usually mounted on a pre-drilled hole on a printed circuit board (PCB) and is then soldered into place. The resistor is also commonly encased in an insulating material, such as plastic or a ceramic material, to protect against damage from heat and friction.This type of resistor is widely used in a variety of applications, such as in cables, amplifiers, TVs, computers, servers, and many other electronic devices. Though the Y00981K50000F9L resistor is not the smallest resistor available, its size allows it to be combined with other parts and components, making it highly adaptable and suitable for a range of applications.The most common application of the Y00981K50000F9L resistor is for current-limiting in circuits. This type of resistor works by providing a “resistance” to the flow of electrical current, which increases as the amount of current increases. By limiting the amount of current flowing through a circuit, this component helps to prevent damage to components within the circuit. This form of current-limiting is also used in cases where the device must maintain a specific voltage level on the output side of the circuit.Other applications for the Y00981K50000F9L resistor include power dissipation, overvoltage protection, noise reduction, and temperature compensation. In power dissipation applications, the resistor is used to absorb power and dissipate it as heat, which prevents components from overheating and being damaged. Overvoltage protection is achieved by providing a “load” of resistance to the circuit, which prevents too much current from passing through. Noise reduction is accomplished by reducing the amount of electrical interference in a circuit, thus reducing undesired noise or electrical signals that may cause disruption. Temperature compensation is used to ensure that the performance of the circuit is unaffected by fluctuations in temperature.The working principle of the Y00981K50000F9L resistor is quite simple. It creates a resistance to the flow of electrical current, which can be adjusted by changing the amount of resistance in the component. The resistance is determined by the amount of current being passed through the resistor, and the amount of resistance is inversely proportional to the amount of current flowing through the resistor. This means that as the amount of current increases, the amount of resistance decreases, and vice versa. This can be used to control the amount of current flowing through a circuit, protecting it from damage due to excessive current, or regulating the voltage level on the output side of the circuit.In conclusion, the Y00981K50000F9L resistor is a versatile and highly effective component used in a variety of applications. Its ability to resist and stabilize electrical current, dissipate and absorb power, and reduce undesired noise and electrical signals make it an ideal component for a wide range of circuit designs. The working principle of this component is simple and easy to understand, which makes it a reliable and dependable component for use in electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description