Y4942V0082AA0L

Series:	300190
Packaging:	Bulk
Part Status:	Active
Circuit Type:	Voltage Divider
Resistance (Ohms):	5k, 10k
Tolerance:	±0.05%
Number of Resistors:	2
Resistor Matching Ratio:	--
Resistor-Ratio-Drift:	--
Number of Pins:	3
Power Per Element:	300mW
Temperature Coefficient:	±2ppm/°C
Operating Temperature:	-55°C ~ 125°C
Applications:	Voltage Divider (TCR Matched)
Mounting Type:	Through Hole
Package / Case:	Radial - 3 Leads
Supplier Device Package:	Radial Lead
Size / Dimension:	0.575" L x 0.160" W (14.61mm x 4.06mm)
Height - Seated (Max):	0.413" (10.49mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Y4942V0082AA0L is a type of resistor network or array, which is often used in electrical and electronic circuits. This type of resistor array provides a convenient way to connect multiple resistors in a circuit, reducing the need for numerous components and making complex circuit designs easier to achieve.The Y4942V0082AA0L consists of two pins which provide access to eight different resistors. The values of these resistors are displayed on the body of the resistor network and are listed in Ohms. The resistors are arranged in two rows and four columns such that each row contains four resistors of the same value while each column contains two resistors of different values. This arrangement allows for a large number of combinations of resistors to be made, depending on the values of each resistor.The Y4942V0082AA0L can be used in a variety of applications. It is often used as a voltage divider, which means it can be used to reduce the voltage of a signal from a higher level to a lower level. It can also be used as a biasnetwork, where the voltage is divided between the two rows and is used to provide a voltage reference to a circuit.In addition, the Y4942V0082AA0L can be used to create an attenuator circuit. Here, the voltage between the two rows is adjusted such that the output voltage is lower than the input voltage. This can be used to reduce the amplitude of a signal without affecting its frequency. Finally, the Y4942V0082AA0L can be used to build a voltage-controlled resistor, where the voltage across each column of resistors is adjusted such that the resistance between the two rows is adjusted accordingly.The working principle of Y4942V0082AA0L is quite simple. It consists of eight resistors connected in rows and columns. When a voltage is applied to one row, it travels down each of the columns until it reaches the opposite row, where it is divided in half. The voltage division is determined by the ratio of the resistors on each side of the circuit, with the higher-valued resistor having a greater effect on the voltage division. The divider output is then taken from one of the resistors in the opposite row. This output can then be used as the input for other circuits.In conclusion, the Y4942V0082AA0L is a resistor network or array which is used in a variety of applications. It is often used as a voltage divider, a bias network, an attenuator circuit, and a voltage-controlled resistors. Its working principle is based on the divisions of voltage across two rows of resistors, with the output voltage being determined by the ratio of the resistors in each row.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description