YC122-JR-0782RL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are important components in many electrical, electronic and communication systems. The YC122-JR-0782RL is an example of a commonly used resistor network.

The YC122-JR-0782RL is a four resistor network which combines two sets of two resistors into one package. Each set of resistors is connected in series, while all four resistors are connected in parallel to each other. The resistors are commonly used in a variety of analog and digital applications.

Application Field

The YC122-JR-0782RL is used in a variety of applications which require a resistance value which is stable over time. These devices are commonly used in audio and video circuits, as they provide a relatively low noise level for these types of signals. The network can also be used as a current divider for power supply applications. For example, it can be used to split the power between two separate circuits in a single PCB.

The resistors can also be used in circuits for impedance matching. In this application, the resistors are used to match the impedance of an output stage to the impedance of the input signal. This ensures that the output stage is able to produce an optimal signal with minimal interference.

YC122-JR-0782RL networks are also commonly used in switching applications. The resistors are able to switch between two different voltage levels, allowing them to act as a switch or a switchable rate shaper.

Working Principle

The working principle of the YC122-JR-0782RL is simple. Each set of two resistors is connected in series, while all four resistors are connected in parallel to each other. When power is applied, the voltage across each resistor is equal to the total voltage applied divided by the total resistance. Therefore, since the total resistance is the sum of the two resistors in series, the voltage across each resistor is equal to half of the total voltage.

As the resistors are connected in parallel, the total current is equal to the sum of the two resistors in series. This allows the resistors to be used to regulate the current in circuits, as well as for current division. As the two resistors have the same voltage across them, the total current is the same as the current flowing through each resistor.

In addition to regulating the current, the resistors can also be used for impedance matching. This is achieved by using a network of two or more resistors to match the impedance of an output stage to the impedance of the input signal. This ensures that the output stage is able to produce an optimal signal with minimal interference.

The YC122-JR-0782RL is a versatile resistor network which can be used in a variety of applications. It is a stable and reliable device which is easy to use and configure. With its low noise level and high performance, it is an ideal choice for a wide range of circuits.

The specific data is subject to PDF, and the above content is for reference