YC324-FK-0734RL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are essential components in a wide range of applications, from automotive systems to commercial and industrial applications. The YC324-FK-0734RL is an example of such a device. This guide will explain the application field and working principle of YC324-FK-0734RL.

Application Field

The YC324-FK-0734RL is an array of seven individual fixed resistors connected in a preset configuration. Each resistor has a nominally 4.7kΩ (4700Ω) resistance and a combined resistance of 7.04kΩ (7040Ω). It is mainly used in low-power systems, in which the circuit current does not exceed 1A. The YC324-FK-0734RL was designed for applications requiring reliable, high-precision resistor networks.

The YC324-FK-0734RL is typically used as part of an electronic circuit, as a voltage divider or as a current limiter. The device can also be used in various power supplies as a resistor pack for current detection or feedback control. Additionally, it can be used in various communication modules and amplifiers as a resistor network for adjusting the gain or voltage level.

Working Principle

The YC324-FK-0734RL is a 7-resistor array made up of precision fixed resistors, each having a nominal 4.7kΩ resistance. Each resistor is connected in parallel to create a series configuration, resulting in the total resistance of the array equal to 7.04kΩ. This combination of resistors is typically used in a voltage divider circuit and can be used to divide a voltage source into two parts: one to be used as a reference voltage and the other to be used as an operational voltage for the circuit.

The YC324-FK-0734RL can also be used to reduce current load on some components. By using the device in series with the circuit, the circuit current can be limited to a maximum of 1A. It can also be used in various amplifier, and other communication modules, as a resistor network for adjusting the gain, cut-off frequency or voltage level. All resistors in the YC324-FK-0734RL are typically wired in parallel to create a single, unified resistor network.

The YC324-FK-0734RL is an example of a precision resistor network that can be used in various low-power applications. It is a reliable and cost-effective solution for voltage division and current limiting. Also, its small size allows it to be housed in compact electrical circuits.

The specific data is subject to PDF, and the above content is for reference