YC324-FK-073K6L

Number of Pins:	8
Height - Seated (Max):	0.028" (0.70mm)
Size / Dimension:	0.200" L x 0.126" W (5.08mm x 3.20mm)
Supplier Device Package:	--
Package / Case:	2012, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	DDRAM, SDRAM
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	125mW
Series:	YC324
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±1%
Resistance (Ohms):	3.6k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The YC324-FK-073K6L is a device that contains a specific type of network known as a resistor array. It is typically used in applications where uniform current distribution is required among multiple components, such as power supplies, switching regulators, LEDs, and amplifiers. A resistor array contains two or more resistors that have been connected in a specific arrangement to provide the electrical characteristics that are desired. To understand the working principle of the YC324-FK-073K6L, it is important to understand the basics of how resistors are used in circuits. Resistors are electrical components that limit the flow of electrical current in a circuit. They are commonly used to control the amount of voltage flowing through a circuit, and can also be used to reduce power consumption. The primary purpose of resistors is to create a voltage drop across the component, so that the desired current can flow through the circuit. The amount of voltage drop created by a resistor is determined by its resistance value, which is measured in ohms. When multiple resistors are wired together in a specific arrangement, they form a resistor network. Depending on the type and arrangement of the resistors, the network can be used to create a wide range of electrical characteristics. For example, a voltage divider network is used to split a single voltage into two separate voltages, while a current limiter network is used to limit the amount of current flowing through the circuit. The YC324-FK-073K6L is a type of resistor network known as an array. It consists of three resistors connected in parallel, which are used to form a uniform current distribution across all three resistors. This means that the same current will flow through each of the three resistors, regardless of the voltage drop across them. This type of arrangement is often used in applications such as power supplies, switching regulators, LEDs, and amplifiers, as it allows for an even distribution of current throughout the system. One of the advantages of using a resistor array is that the design of the network can be adjusted to meet the specific needs of the application. By changing the resistance values of the resistors, the voltage and current distribution of the network can be altered to fit the needs of the circuit. This makes them versatile and suitable for a wide range of applications. In summary, the YC324-FK-073K6L is a type of resistor array used in applications where uniform current distribution is required. It consists of three resistors connected in parallel, which are used to create a uniform current distribution across the resistors. This enables the same current to flow through each of the three resistors, regardless of the voltage drop across them. The resistance values of the resistors can be adjusted to meet the specific needs of the application, making the device highly versatile.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description