YC358LJK-0747KL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are key components for any electronic system. They enable designers to divide power, achieve precise voltage regulation, and enable communication between integrated circuits or devices. The YC358LJK-0747KL resistor network and array, manufactured by KEC Electronics Co., Ltd., is a popular choice among electronics engineers. This multi-phased resistor network is a versatile solution for engineers looking to reduce noise, noise in signal lines, or to increase system robustness.

The YC358LJK-0747KL is a 4-channel surface mount resistor network, with each channel containing five resistors that are connected in series. This particular device contains a total of 20 resistors with a resistance of 0.1Ω. It also provides a maximum voltage rating of 35V and a maximum current of 409mA. Additionally, this device is available in different resistance values, ranging from 0.01Ω to 1kΩ, and is available in different package sizes.

When it comes to the application field of the YC358LJK-0747KL, this device is well-suited for multiple applications, including power management, filtering, and signal isolation. For power management, this device can be used to divide power within the circuit or even reduce electrical noise. This is possible through the series connection of five resistors, as not only does this reduce the amount of voltage or current of one particular resistor but the total overall voltage or current of the entire network.

In terms of filtering, the YC358LJK-0747KL resistor network is commonly used to filter out unwanted signals or frequencies. This is due to the series connection of the resistors, as the transfer impedance between these resistors creates electrical filtering. As a result, the YC358LJK-0747KL is extremely useful in systems that require signal interference rejection. As for signal isolation, the YC358LJK-0747KL is a suitable device to isolate two circuits or components by preventing them from being shorted out. This can be achieved through the resistance between two circuits or components as the resistor creates a low resistance path between these circuits or components.

In addition, the YC358LJK-0747KL also has its working principle, which can be broken down into a few general principles. Firstly, the YC358LJK-0747KL resistor network normally operates in three different modes: parallel, series, and bridge. In the parallel mode, each resistor in the array is connected in parallel to each other. This configuration allows for a greater current passing through the resistor network, while the total resistance decreases. Secondly, the resistor network can be set to operate in series mode. This mode is beneficial for reducing voltage, as the input voltage is divided among the resistors. Thirdly, the bridge mode of operation is primarily used to isolate circuits and components from one another.

Lastly, the resistor network also works as a voltage divider, which serves to divide the input voltage into multiple voltages. This is possible through the series arrangement of the resistors. As the input voltage is divided across each resistor, the output voltages will be different. Depending on the resistance values of each resistor, the output voltages will be either increased or decreased respectively when compared to the input voltage.

The YC358LJK-0747KL resistor network is a highly versatile and robust component that can be used in a variety of applications. It is well-suited for power management, signal filtering, and signal isolation, and can also serve as a voltage divider. With its wide range of features and capabilities, the YC358LJK-0747KL is an excellent choice for engineers looking for a reliable and cost-effective solution.

The specific data is subject to PDF, and the above content is for reference