YR0601500000G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The YR0601500000G terminal block, classified as belonging to the \'Wire to Board\' family, is a general-purpose connector made for quick and secure connection of multiple wires to electrical boards and circuits. Connecting and disconnecting of wires is made easy with low-torque, captive screws for easy assembly. The YR0601500000G terminal block has a pitch of 6.00mm and has a 3.96mm center-line spacing, allowing it to handle up to 9AWG wire.

The range of YR0601500000G terminal blocks are enclosed in a shiny black housing of UL94V-0 rated, non-flame retardant plastic, which has been designed to provide maximum protection against wear. The terminal block is offered in three styles: pluggable, inte-grated lever, and non-integrated lever terminal blocks. The integrated lever terminal blocks feature a self-closing hinge that returns the lever automatically into the locked position. This is especially useful where repeated connection/disconnection of the connection may be required during the operation of a system. The non-integrated lever terminal blocks feature a screwdriver operated lever for additional convenience.

The YR0601500000G terminal blocks allow for connection of multiple conductors in a single piece of equipment. Each unit has two or three 4mm width terminal bars per pole. These allow for connection of two or three different wires, allowing for secure connections even when two or more wires are connected to the same terminal bar. Each terminal block also features two independent barrier layers to ensure safe and secure connection of the wires.

Both the elimination of stress and vibration, and the cable strain relief offered by the YR0601500000G Terminal Blocks are aided by the presence of spring contacts at the rear of the terminal block. The contacts also provide protection against over-currents, thereby limiting the transmission of heat from too large an overload condition. Overload conditions are further reduced by the presence of the two independent barrier layers for each pole.

The terminal blocks also feature a convenient system of snap-in mounting, making it easy to install the YR0601500000G terminal block into a wide range of equipment designs. This requires only minimal effort and no additional space in comparison to other connection solutions. Furthermore, the terminal blocks are easily wired, requiring no extra time for the installer or user.

The YR0601500000G terminal blocks are suited to a vast number of applications, including, but not limited to, automotive, electrical enclosure and monitoring systems, lighting control systems, emergency lighting systems, process planning, and communication networks.

The working principle of the YR0601500000G Terminal Blocks follows the traditional method of mechanically connecting multiple conductors to electrical boards and circuits. This terminal block makes use of screws or levers to secure the wires into place, and features spring contacts to ensure good and secure connection of the wire. The terminal block’s frame and mounting system are designed to minimise installation time and offer maximum protection against wear and over-currents.

Overall, the YR0601500000G Terminal Block is a highly effective solution for a wide range of applications, allowing for easy connection of multiple wires to electrical boards and circuits. Its convenient snap-in mounting and its selection of styles make it an excellent choice for those looking for a durable connection solution.

The specific data is subject to PDF, and the above content is for reference