Z32041433300J2CC06 Resistors

Series:	Z300-C
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	330 Ohms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Wirewound
Features:	Flame Retardant Coating, High Voltage, Pulse Withstanding, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.189" Dia x 0.512" L (4.80mm x 13.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a type of electronic component used to regulate current flow and provide electrical resistance in a circuit. The Z32041433300J2CC06 is a through hole resistor designed for use in applications involving high current and voltage. The resistor is a cylindrical, ceramic-based component with four metal legs that protrude from its body. These legs are intended for insertion into printed circuit boards (PCBs) to make electrical connections with other components. Each leg measures 0.472 inches in length and has a diameter of 0.127 inches.The Z32041433300J2CC06 is rated for a maximum power dissipation of 4 watts. This means that it can handle up to 4 watts of energy without overheating or shorting. It also has a continuous operating temperature range of -55°C to +125°C, allowing for use in a variety of environmental conditions. Additionally, the resistor is rated for a current rating of 0.006A, meaning it can handle a constant current of up to 0.006A.The resistor also has a high-precision tolerance of ±0.1%. This means that the resistance of the resistor can vary by 0.1% or less from the rated value. This is important in applications where precise voltage or current levels must be maintained, such as in amplifiers.When used in a circuit, the Z32041433300J2CC06 works by dividing voltage across its legs according to Ohm\'s Law. This law states that when a constant voltage is applied across a resistor, the current flowing through the device is directly proportional to the resistance. As the resistance increases, more voltage is "tapped" off, resulting in a decrease in current.In summary, the Z32041433300J2CC06 is a through hole resistor specifically designed for high current and voltage applications. It is rated for a maximum power dissipation of 4 watts and has a high-precision tolerance of ±0.1%. When connected to a circuit, the resistor works by dividing voltage across its legs according to Ohm’s Law.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description