Z4GP210-HF Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Z4GP210-HF is a diode, specifically referred to as a bridge rectifier. It is used to convert an alternating current (AC) signal into a direct current (DC). The process is common for power supplies, where the DC voltage is fed into electronics and appliances. Bridge rectifiers are also used for applications which require reverse polarity protection, such as computer systems.

A bridge rectifier is made up of four diodes, arranged in a bridge configuration. This creates a circuit in which the AC input is applied in sequence and the DC output is connected to the bridge output nodes. The bridge circuit is split into two full-wave rectifier circuits, and the output is rectified both positively and negatively. This results in the output current to be “pushed” and “pulled” between two nodes of the circuit, and thus the output current is half-sinusoidal, as opposed to a single positive or negative peak that is formed by a single diode rectifier.

The Z4GP210-HF bridge rectifier has a maximum forward voltage of 0.7V and can handle up to 2A of current. Additionally, the diode is available in both ceramic and plastic packages and is designed for applications with working temperatures ranging from -65°C to 150°C. The device is designed for a high frequency, Fast Switching application, making it ideal for applications such as converter systems, switched circuited in solar cells, and also most power supplies.

In terms of operation, the Z4GP210-HF bridge rectifier works as a full-wave rectifier, meaning it converts an AC signal into a DC signal. The AC signal is applied to the bridge nodes, and the current flows through the two paths around the four diodes, allowing the current to form a full waveform. The diode connected between the positive and negative AC inputs, known as the cathode, will provide current to the bridge output terminal on the positive input and act as a short circuit between the positive and negative inputs. The diode will be reverse-biased when an AC voltage is applied. When the voltage across the two diodes exceeds the forward voltage of the diodes, then the current through the diodes will begin to increase and flow through the circuit.

The Z4GP210-HF is a popular choice for power supply applications, as these devices can handle higher currents and temperatures than other bridge rectifiers. Additionally, its fast switching feature is preferred for electronics equipment, inverters, and transformers, due to its ability to quickly respond to changes in the alternating voltage. Due to its ability to manage higher voltages and temperatures, the device is also suitable for heavy-duty industrial uses such as heavy motors, pumps and welding equipment.

The Z4GP210-HF is a versatile device, and has been designed to address a broad spectrum of applications. The component is an ideal choice for many power supply and main power applications, as its fast switching width and temperature resistance make it an attractive solution. Its ability to handle heavy current and voltage makes it suitable for a wide range of industrial applications, and its low forward voltage makes it a great choice for consumer electronics. The component is available in both ceramic and plastic packages, making it an ideal choice for a variety of needs.

The specific data is subject to PDF, and the above content is for reference