ZM5202AH-CME3R RF/IF and RFID |
|
Allicdata Part #: | 703-1073-1-ND |
Manufacturer Part#: |
ZM5202AH-CME3R |
Price: | $ 8.70 |
Product Category: | RF/IF and RFID |
Manufacturer: | Silicon Labs |
Short Description: | RF TXRX MODULE ISM ... |
More Detail: | N/A |
DataSheet: | ZM5202AH-CME3R Datasheet/PDF |
Quantity: | 1712 |
1 +: | $ 7.90650 |
25 +: | $ 7.27650 |
100 +: | $ 6.33780 |
Serial Interfaces: | SPI, UART, USB |
Package / Case: | Module |
Operating Temperature: | -- |
Mounting Type: | Surface Mount |
Current - Transmitting: | 41mA |
Current - Receiving: | 32mA |
Voltage - Supply: | 2.3 V ~ 3.6 V |
Memory Size: | 128kB Flash, 16kB SRAM |
Utilized IC / Part: | 3000 SERIES |
Antenna Type: | -- |
Series: | Z-Wave® |
Sensitivity: | -103dBm |
Power - Output: | 4dBm |
Data Rate: | 100Kbps |
Frequency: | 921MHz |
Modulation: | -- |
Protocol: | Z-Wave® |
RF Family/Standard: | General ISM |
Part Status: | Active |
Packaging: | Cut Tape (CT) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Transceiver Modules are designed to act as two way radio systems that enable both the reception and transmission of data across a specific frequency band. The ZM5202AH-CME3R is a type of RF Transceiver Module that is used in applications such as radio communication, radio-astronomy and industrial instruments.
It has power output of between 5-25mW, supports bit rates up to 64 kb/s, and has a frequency range of 170-510 MHz within the UHF band. It uses a combination of dual-loop demodulation and amplitude shaping techniques to provide reliable reception with improved battery life. The device is programmable allowing for changes to the modulation format, frequency, rate, data rate, coding rate, etc.
The module is air-cavity sealed and supports a wide range of antenna options such as SMA, MMCX and UFL. The ZM5202AH-CME3R includes adaptive filters to reduce RF interference and noise as well as the ability to eliminate noise frequencies that may be generated by high-frequency signals.
The ZM5202AH-CME3R is most commonly used in applications such as emergency services radios, remote control systems, cellular networks, data-transmission networks, vehicle tracking systems, navigation systems, and radio-astronomy. It is also becoming increasingly popular for use in the industrial instruments sector, due to the module’s stability and consistent performance in high-temperature environments.
In terms of working principle, the ZM5202AH-CME3R harnesses the radio frequency (RF) emission of a transmitter to transfer data. The transmitter broadcasts an RF signal containing the data, which the receiver then captures and sends on to the destination. To do this, the receiver needs to be tuned to the exact frequency of the transmitter, and the signal needs to be sufficiently strong for it to be picked up by the receiver.
The receiver then extracts the data from the RF signal, and then transmits it to the destination. This data transmission process is known as frequency modulation, which is a method of transmitting information by varying the frequency of a carrier wave. The amplitude of the wave remains constant, and only the frequency changes. The changing frequency is then used to represent digital 1’s and 0’s.
The ZM5202AH-CME3R is equipped with an adaptive filter that helps remove interference and noise signals from the RF signal, whilst still allowing for the reception of the signal. This filter helps make sure that the receiver can precisely distinguish between the frequency of the transmitted signal and any other signals. As the ZM5202AH-CME3R is designed for the UHF band, it can make use of the high-strength signal power that is often associated with this band.
In addition, the module offers excellent power consumption, with a standby current of 0.35μA. This helps reduce power consumption, extending the life of the battery. It also supports a wide range of antenna options, including SMA, MMCX and UFL, allowing for the optimal receiving and transmitting setup for any application.
The ZM5202AH-CME3R module offers an ideal solution for many applications due to its reliable reception, low power consumption, and wide-ranging frequency coverage. It is also an ideal solution for industrial instruments, due to its ability to work in extreme temperatures. As a result, the module is becoming increasingly popular for use in simple two-way radio communications applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ZM5202AH-CME3R | Silicon Labs | 8.7 $ | 1712 | RF TXRX MODULE ISM ... |
ZM5202AE-CME3R | Silicon Labs | 4.19 $ | 1000 | RF TXRX MODULE ISM ... |
ZM5202AU-CME3R | Silicon Labs | 4.19 $ | 1000 | RF TXRX MODULE ISM ... |
2.4GHz transceiver, 64MHz Arm Cortex M4F...
ENET-ZBP113 ZIGBEE MODULE
RF TXRX MODULE ISM>1GHZ U.FL ANT
RF TXRX MOD BLUETOOTH/WIFI U.FL
RF TXRX MOD CELLULAR/NAV U.FL
RF TXRX MODULE ISM ...