ZN01 025 0007 1

Series:	heavy|mate®, C146 S
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Type:	Stamped
Pin or Socket:	Pin
Contact Termination:	Crimp
Wire Gauge:	16-20 AWG
Contact Finish:	Silver
Contact Finish Thickness:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Heavy Duty Connectors - Contacts, ZN01 025 0007 1 Application Field and Working Principle

Heavy Duty Connectors (HDC) are used in a variety of industries. They are most commonly used as terminals, plugs, sockets, power connectors, and adapters in the fields of automotive, telecommunications, aerospace, medical and other industrial sectors. The HDC Type ZN01 025 0007 1 connector is a reliable, efficient, and cost-effective solution for many applications.The HDC ZN01 025 0007 1 connector is one of the most commonly used in high power applications. It is used when reliable, robust and efficient performance in hostile environments is needed. This connector comes in several types, each of which has different application fields and working principals.The first type is a High Voltage (HV) connector. It is used to connect electrical devices at higher voltages up to 15000V, for both AC and DC applications. This type of connector has two components; an electrical contact and a conductive interface. The contact is either held together with a fastener or fixed mechanically to the device requiring connection. The electrical contact is then surrounded by a conductive interface which prevents the contact from arcing or burning out due to high voltage.The second type is a Low Voltage (LV) connector. This type is used to connect devices at low voltages, usually up to 600 volts. It is used in automotive, medical, industrial and consumer applications. The connectors come in different sizes and shapes to suit different types of application. They are usually held together by latches, pins, or clamping systems. The materials used to construct LV connectors are typically chosen based on environmental requirements.The third type is an RF connector. This type is used to connect devices which use radio frequency signals. It is designed to provide high quality, low feedback radio frequency signals for efficient data transmission. It is commonly used in telecommunications, satellite systems, and for wireless LAN networks. The connector may be soldered or you may need to use special screws to secure it in place.The HDC ZN01 025 0007 1 connector is used in a wide range of applications. In each of these application fields it is highly efficient and reliable. It has the ability to resist damage caused by adverse weather conditions such as rain, wind, and sand. It is also easy to install and maintain. In addition, it is designed to ensure that the connected devices are able to provide the highest quality performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description