Allicdata Part #: | ZUK2000H-ND |
Manufacturer Part#: |
ZUK2000H |
Price: | $ 301.15 |
Product Category: | Sensors, Transducers |
Manufacturer: | Red Lion Controls |
Short Description: | 2000 PPR 1.125 INCH THRU-BORE |
More Detail: | N/A |
DataSheet: | ZUK2000H Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 273.76700 |
Series: | ZUK |
Part Status: | Active |
Encoder Type: | Mechanical |
Output Type: | Quadrature with Index (Incremental) |
Pulses per Revolution: | 2000 |
Voltage - Supply: | 4.75 V ~ 28 V |
Actuator Type: | 1 1/8" Open Center |
Detent: | No |
Built in Switch: | -- |
Mounting Type: | Chassis Mount, Motors |
Orientation: | -- |
Termination Style: | Connector |
Rotational Life (Cycles Min): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Encoders are widely used in motor control systems and robotics to provide feedback information related to the speed of a motor or other mechanisms. They are available in a variety of formats, such as incremental or absolute, optical, magnetic or digital. ZUK2000H is an optical absolute encoder from Zytec Corporation, providing a large range of output signals, including incremental quadrature signals, line-driver signals and an internal RS232 serial interface.
The ZUK2000H is a high-quality, heavy-duty, single-ended encoder specifically designed for motor applications. The encoder is available with a variety of resolutions, from single line up to 10-bit, and support for both Sine-Cosine or Gray binary codes. It also includes a ratiometric output for analog applications. The encoder is packaged as a single, robust unit, with the encoder electronics enclosed in a sealed housing, providing good protection from dirt and dust, as well as from oil and water splash exposure.
The ZUK2000H employs a patented integrated optical scanning system that converts linear and angular displacement into an electrical signal. The system consists of a thin-film optical disk mounted on a spindle shaft, plus an integrated optical detector. If the disk is illuminated by a light source, the detector senses a photo-sensitive area of the disk when it rotates. This achieves a very high resolution, up to 4096 counts per revolution, depending on the disk geometry and the resolution of the optical signal.
The ZUK2000H is particularly suited for applications where a high degree of accuracy is essential, such as industrial automation, machine control, robotics, and medical equipment. Additionally, its wide range of output formats make it suitable for a range of applications, such as closed-loop motion control, speed control, position and velocity sensing, or measuring the speed of a motor or some other mechanism.
Essentially, the working principle of the ZUK2000H is simple. As the shaft of the spindle rotates, the encoder disk is likewise rotated, producing an optical signal which is detected by the integrated optical detector. The optical signal is then converted into electrical pulses, which are used to drive the incremental position signals, lines-driver signals or the internal RS232 serial interface. The encoder can also be used to measure the rotation speed, by counting the number of electrical pulses within a given period of time.
The ZUK2000H optical absolute encoder is a highly accurate compact device for industrial and robotic applications where precision is of the essence. Thanks to its integrated optical scanning system, the encoder provides a wide range of output signals for use in a variety of applications, including closed-loop motion control, speed control, position and velocity sensing, and measuring the speed of a motor or some other mechanism. The ZUK2000H is also packaged as a single, robust unit, with the encoder electronics enclosed in a sealed housing, providing good protection from dirt and dust, as well as from oil and water.
The specific data is subject to PDF, and the above content is for reference
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V