ZUW62412

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters are electronic components used to convert DC electrical power from one voltage to another, and it can also be used to control current flow. The ZUW62412 is one such DC-DC converter. It is a 3-terminal low-dropout (LDO) regulator with an adjustable output range of 1.2 to 12V, designed to provide high-efficiency power conversion with low noise levels for portable applications.

Features

The ZUW62412 features an adjustable output range of 1.2 to 12V and a maximum dropout voltage of 400mV. It also has ultra-low quiescent current (IQ) of just 20µA, making it ideal for use in battery-powered systems. The device also features reverse current capability for better load protection, as well as over-temperature and over-voltage protection. The input voltage range is from 1.6V to 6V, and the ZUW62412 has a maximum output current rating of 600mA.

Applications

The ZUW62412 is designed for use in a wide range of portable applications, including smartphones, tablets, and wearable technology. It can be used for any device that requires a constant output voltage with low noise levels. It can also be used for powering low-noise and low-power circuits, such as low-power FPGAs, microcontrollers, and analog circuits.

Working Principle

The ZUW62412 operates on the linear regulator principle. It is constructed with two transistors and a resistor, and it works by regulating the voltage output by controlling the base-emitter current of the transistor. The voltage is adjusted by adjusting the resistor.

The ZUW62412 is designed with a N-channel MOSFET pass transistor. This pass transistor acts as a switch and allows the regulator to control the output voltage. By properly sizing the pass transistor, the regulator is able to limit the output current as well as preventing the output voltage from over-voltage and under-voltage conditions.

The ZUW62412 also features a feedback loop with an error amplifier. The error amplifier monitors the output voltage and sends a control signal to the pass transistor. This control signal adjusts the resistance to maintain the desired output voltage.

The specific data is subject to PDF, and the above content is for reference