ZWS300BAF48/CO2

Power (Watts):	300W (336W Forced Air)
Approvals:	CE, cURus, TUV
Minimum Load Required:	--
Size / Dimension:	7.09" L x 3.31" W x 1.65" H (180.0mm x 84.0mm x 42.0mm)
Mounting Type:	Chassis Mount
Features:	Adjustable Output, DC Input Capable, Load Sharing, PFC, Universal Input
Operating Temperature:	-10°C ~ 70°C (With Derating)
Efficiency:	88%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	ZWS300BAF
Current - Output (Max):	6.3A
Voltage - Output 4:	--
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input:	85 ~ 265 VAC
Number of Outputs:	1
Type:	Open Frame, Conformal Coated
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

AC DC Converters

The ZWS300BAF48/CO2 is an AC DC converter designed for converting AC voltage to DC voltage. It has a wide range of applications, from industrial, commercial and residential applications. It is used extensively in the switchgear and motor control industry.The ZWS300BAF48/CO2 is a three-phase bridge rectifier with a built-in step-down transformer. It is designed to provide efficient power conversion from an AC mains supply to a regulated DC voltage, typically for motor control circuits. It is capable of handling up to three-phase voltages up to 48V and delivering up to 300A of continuous output current.The operating principle of the ZWS300BAF48/CO2 is based on the basic AC-DC conversion process. It uses the standard three-phase bridge rectifier design. The rectifier is composed of six diodes connected in a bridge configuration. The incoming AC mains voltage is applied across the bridge. As the voltage goes through a cycle, both positive and negative voltages are applied to the bridge, resulting in an alternating current (AC) voltage across the six diodes. As the current passes through the rectifier, it is converted to a DC voltage.The step-down transformer further reduces the voltage from the rectifier to the desired DC voltage. The transformer works by converting the higher AC voltage from the rectifier to a lower AC voltage. This is achieved by passing the rectified AC current through two or more inductor coils connected in series. The current flowing through the coils causes a magnetic reaction which results in a lower voltage at the secondary terminal of the transformer.The output of the ZWS300BAF48/CO2 AC DC converter is then used to drive the motor control circuits. The AC DC converter provides a stable voltage for the motor control circuits and enables them to operate effectively. It also helps to protect the equipment and circuit components from overvoltage or current surges.The ZWS300BAF48/CO2 AC DC converter is highly efficient and reliable, making it suitable for a wide range of applications. It is especially suitable for applications that require a high degree of voltage stabilization. The ZWS300BAF48/CO2 is also relatively inexpensive and easy to install and use.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description