ZY7015LG-T2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are widely used for applications in many different industries. The ZY7015LG-T2 is a high efficiency, low power, single output DC DC converter from ZET Technologies. It is designed to provide a power solution for space-limited power systems such as mobile and portable electronics.

The ZY7015LG-T2 is a step-down switching regulator with high output current capability and high efficiency. It can be connected to either a 2S Li-ion battery or a regulated DC power source to provide output voltage of up to 13.2V/50W with excellent cost-performance ratio. It supports a wide input voltage range of 9V-24V with an input ripple current of less than 20mVp-p in full load operation.

The ZY7015LG-T2 can be used in a variety of applications that require a reliable, stable, and efficient DC DC converter such as automotive applications, communication systems, and consumer electronics. It provides high efficiencies up to 93% and has a thermal cut-off function that will shut down the output in the event of over-current or over-temperature conditions. In addition, the ZY7015LG-T2 has a high level of noise immunity due to its 3-stage noise reduction circuitry.

The working principle of the ZY7015LG-T2 is based on a synchronous converter topology. It takes a DC input voltage and produces a regulated DC output voltage by switching the input voltage through two power switches. The two switches are alternately switched, constantly in/off in a certain ratio, and the resulting output voltage is determined by the control loop.

In the first stage, the input voltage is fed to an inductor which stores and releases the energy to a capacitor placed in series with the output. By switching the input voltage, a voltage drop across the inductor generated by the inductance induces a voltage across the output capacitor. As the two switches switch, the voltage across the inductor is alternately higher or lower than the poer source voltage. This alternating voltage is regulated by the control loop to a set voltage or current.

The second stage of the ZY7015LG-T2 uses a switching frequency to adjust the amount of energy stored in the magnetic component. When the voltage of the magnetic component reaches the set value, the controller will shut off the power switch and the energy stored in the magnetic component will be used to charge the output capacitor, thus providing the required output voltage. The adjustable switching frequency also helps to reduce electromagnetic interference and minimize noise generated by the converter.

Finally, the output voltage is regulated by a voltage feedback circuit. This feedback loop ensures that the output voltage of the ZY7015LG-T2 is always constant and that it is not affected by input variations, external temperature, and load changes. This feedback loop also helps to reduce the total output voltage ripple and improve the output signal quality.

The ZY7015LG-T2 provides a wide array of features and performance that make it an ideal choice for a variety of power conversion applications. It is designed to provide excellent efficiency, low ripple, and thermal protection while providing high output current capability. In addition, its small size and cost make it suitable for space-limited applications such as mobile and consumer electronics.

The specific data is subject to PDF, and the above content is for reference