Contact Us:00852-30501886 Email:sales@allicdata.com
Sitemap How to buy Login / Register
USD
USA EN
Cart(0)
Products Manufacturers Authorized Agent Send RFQ Blog（news） About us
Home> Products>

Search Result:logical non-inverting driver

 --1188 Item(s) In Category:Terminals - Turret Connectors

Related Categories

Connectors, Interconnects
Card Edge Connectors - Edgeboa...
Circular Connectors - Housings
Terminal Blocks - Headers, Plu...
D-Sub Connectors
Circular Connectors - Backshel...
Backplane Connectors - Special...
Terminals - Quick Connects, Qu...
Terminals - Rectangular Connec...
Terminals - Ring Connectors
Terminals - PC Pin, Single Pos...
D-Sub, D-Shaped Connectors - H...
Circular Connectors - Accessor...
Terminals - Turret Connectors
Coaxial Connectors (RF)
FFC, FPC (Flat Flexible) Conne...
Terminals - Wire Splice Connec...
Backplane Connectors - Hard Me...
Backplane Connectors - ARINC
Rectangular Connectors - Array...
Circular Connectors - Adapters
Terminals - Spade Connectors
D-Shaped Connectors - Centroni...
Rectangular Connectors - Housi...
Rectangular Connectors - Heade...
Integrated Circuits (ICs)
Memory
Embedded - FPGAs (Field Progra...
Interface - Drivers, Receivers...
Logic - Buffers, Drivers, Rece...
Logic - Gates and Inverters
PMIC - Voltage Regulators - DC...
PMIC - Gate Drivers
PMIC - LED Drivers
PMIC - Power Distribution Swit...
Data Acquisition - Digital Pot...
PMIC - Motor Drivers, Controll...
Logic - Flip Flops
Embedded - CPLDs (Complex Prog...
Embedded - DSP (Digital Signal...
Logic - Latches
Embedded - System On Chip (SoC...
Logic - Counters, Dividers
Logic - Shift Registers
Logic - Translators, Level Shi...
Logic - Specialty Logic
PMIC - Voltage Regulators - Li...
Logic - Gates and Inverters - ...
PMIC - Full, Half-Bridge Drive...
Capacitors
Tantalum Capacitors
Aluminum Electrolytic Capacito...
Tantalum - Polymer Capacitors
Mica and PTFE Capacitors
Thin Film Capacitors
Film Capacitors
Switches
Toggle Switches
Rotary Switches
Tactile Switches
Accessories - Caps
Configurable Switch Components...
Slide Switches
Keylock Switches
Circuit Protection
TVS - Diodes
Fuses
Electrical, Specialty Fuses
TVS - Thyristors
Fuseholders
Relays
Power Relays, Over 2 Amps
Signal Relays, Up to 2 Amps
Reed Relays
Inductors, Coils, Chokes
Fixed Inductors
Power Supplies - Board Mount
DC DC Converters
Cable Assemblies
D-Sub Cables
Rectangular Cable Assemblies
Resistors
Through Hole Resistors
Chassis Mount Resistors
Power Supplies - External/Intern...
LED Drivers
Development Boards, Kits, Progra...
Evaluation Boards - DC/DC &...
Evaluation and Demonstration B...
Evaluation Boards - LED Driver...
Potentiometers, Variable Resisto...
Trimmer Potentiometers
Rotary Potentiometers, Rheosta...
Discrete Semiconductor Products
Thyristors - SCRs
Thyristors - TRIACs
Thyristors - SCRs - Modules
Transistors - FETs, MOSFETs - ...
Power Driver Modules
Transistors - IGBTs - Modules
RF/IF and RFID
RF Shields
RFI and EMI - Shielding and Ab...
Audio Products
Alarms, Buzzers, and Sirens
Cables, Wires - Management
Spiral Wrap, Expandable Sleevi...
Solder Sleeve
Boxes, Enclosures, Racks
Rack Components
Racks
Isolators
Isolators - Gate Drivers
Tools
Crimpers, Applicators, Presses
Optoelectronics
Fiber Optics - Transmitters - ...
Panel Indicators, Pilot Lights
Test and Measurement
Test Leads - Banana, Meter Int...
Cables, Wires
Single Conductor Cables (Hook-...
Uncategorized
Miscellaneous
Photo Allicdata Part# Mft.Part# Company Spec. QTY. Pricing(USD) PDF
2812-4-00-01-00-00-07-0 2812-4000100000
70-ND		 2812-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2812
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.360" (9.14mm)
 Length - Below Flange: 0.542" (13.77mm)
 Length - Overall: 0.902" (22.91mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.082" (2.08mm), 0.145" (3.68mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.188" (4.78mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.5115

 2812-400010000070-ND Datasheet
2111-3-00-01-00-00-07-0 2111-3000100000
70-ND		 2111-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2111
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.070" (1.78mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.185" (4.70mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.047" (1.19mm)
 Diameter - Turret Head: 0.032" (0.81mm)
 Staking Side OD: 0.030" (0.76mm)
 Staking Side ID: 0.020" (0.51mm)
 Mounting Hole Diameter: 0.033" (0.84mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2111-300010000070-ND Datasheet
2325-3-00-01-00-00-07-0 2325-3000100000
70-ND		 2325-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2325
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.109" (2.77mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.224" (5.69mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.070" (1.78mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.073" (1.85mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2325-300010000070-ND Datasheet
2705-1-00-01-00-00-07-0 2705-1000100000
70-ND		 2705-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2705
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.237" (6.02mm)
 Length - Below Flange: 0.209" (5.31mm)
 Length - Overall: 0.446" (11.33mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.062" (1.57mm), 0.093" (2.36mm)
 Mounting Hole Diameter: 0.129" (3.28mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3486

 2705-100010000070-ND Datasheet
2804-2-00-01-00-00-07-0 2804-2000100000
70-ND		 2804-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2804
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.328" (8.33mm)
 Length - Below Flange: 0.109" (2.77mm)
 Length - Overall: 0.437" (11.10mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.146" (3.71mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.118" (3.00mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3593

 2804-200010000070-ND Datasheet
2111-2-00-01-00-00-07-0 2111-2000100000
70-ND		 2111-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2111
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.070" (1.78mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.154" (3.91mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.047" (1.19mm)
 Diameter - Turret Head: 0.032" (0.81mm)
 Staking Side OD: 0.030" (0.76mm)
 Staking Side ID: 0.020" (0.51mm)
 Mounting Hole Diameter: 0.033" (0.84mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2111-200010000070-ND Datasheet
2108-3-00-01-00-00-07-0 2108-3000100000
70-ND		 2108-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2108
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.156" (3.96mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.271" (6.88mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.062" (1.57mm)
 Diameter - Turret Head: 0.040" (1.02mm)
 Staking Side OD: 0.040" (1.02mm)
 Staking Side ID: 0.024" (0.61mm)
 Mounting Hole Diameter: 0.043" (1.09mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2108-300010000070-ND Datasheet
2301-2-00-01-00-00-07-0 2301-2000100000
70-ND		 2301-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2301
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.093" (2.36mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.177" (4.50mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.063" (1.60mm)
 Staking Side OD: 0.062" (1.57mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.067" (1.70mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2301-200010000070-ND Datasheet
2365-3-00-01-00-00-07-0 2365-3000100000
70-ND		 2365-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2365
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.213" (5.41mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.328" (8.33mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.051" (1.30mm)
 Staking Side OD: 0.073" (1.85mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2365-300010000070-ND Datasheet
2510-1-00-01-00-00-07-0 2510-1000100000
70-ND		 2510-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2510
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.136" (3.45mm)
 Length - Below Flange: 0.062" (1.57mm)
 Length - Overall: 0.198" (5.03mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.062" (1.57mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.042" (1.07mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2510-100010000070-ND Datasheet
2706-3-00-01-00-00-07-0 2706-3000100000
70-ND		 2706-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2706
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End, Pin
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.344" (8.74mm)
 Length - Overall: 0.563" (14.30mm)
 Mounting Type: Through Hole
 Termination: Swage, Knurled
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.093" (2.36mm), 0.094" (2.39mm)
 Mounting Hole Diameter: 0.120" (3.05mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3638

 2706-300010000070-ND Datasheet
2512-2-00-01-00-00-07-0 2512-2000100000
70-ND		 2512-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2512
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.282" (7.16mm)
 Length - Overall: 0.501" (12.73mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3028

 2512-200010000070-ND Datasheet
2308-2-00-01-00-00-07-0 2308-2000100000
70-ND		 2308-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2308
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.156" (3.96mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.240" (6.10mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.061" (1.55mm)
 Staking Side OD: 0.061" (1.55mm)
 Staking Side ID: 0.044" (1.12mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2308-200010000070-ND Datasheet
2310-4-00-01-00-00-07-0 2310-4000100000
70-ND		 2310-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2310
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single, Double
 Length - Above Board: 0.186" (4.72mm)
 Length - Below Flange: 0.227" (5.77mm)
 Length - Overall: 0.413" (10.49mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.051" (1.30mm)
 Mounting Hole Diameter: 0.067" (1.70mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2310-400010000070-ND Datasheet
2325-2-00-01-00-00-07-0 2325-2000100000
70-ND		 2325-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2325
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.109" (2.77mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.193" (4.90mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.070" (1.78mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.073" (1.85mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2325-200010000070-ND Datasheet
2102-5-00-01-00-00-07-0 2102-5000100000
70-ND		 2102-5-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2102
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.094" (2.39mm)
 Length - Below Flange: 0.035" (0.89mm)
 Length - Overall: 0.129" (3.28mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.064" (1.63mm)
 Diameter - Turret Head: 0.041" (1.04mm)
 Staking Side OD: 0.047" (1.19mm)
 Staking Side ID: 0.028" (0.71mm)
 Mounting Hole Diameter: 0.052" (1.32mm)
 Board Thickness: 0.016" (0.41mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2102-500010000070-ND Datasheet
2501-1-00-01-00-00-07-0 2501-1000100000
70-ND		 2501-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2501
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.078" (1.98mm)
 Length - Overall: 0.297" (7.54mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.093" (2.36mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2501-100010000070-ND Datasheet
2510-2-00-01-00-00-07-0 2510-2000100000
70-ND		 2510-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2510
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.136" (3.45mm)
 Length - Below Flange: 0.094" (2.39mm)
 Length - Overall: 0.230" (5.84mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.062" (1.57mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.042" (1.07mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2510-200010000070-ND Datasheet
2801-4-00-01-00-00-07-0 2801-4000100000
70-ND		 2801-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2801
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.360" (9.14mm)
 Length - Below Flange: 0.172" (4.37mm)
 Length - Overall: 0.532" (13.51mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.145" (3.68mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.377

 2801-400010000070-ND Datasheet
2817-2-00-01-00-00-07-0 2817-2000100000
70-ND		 2817-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2817
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.460" (11.68mm)
 Length - Below Flange: 0.105" (2.67mm)
 Length - Overall: 0.565" (14.35mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.145" (3.68mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.4002

 2817-200010000070-ND Datasheet
2312-3-00-01-00-00-07-0 2312-3000100000
70-ND		 2312-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2312
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.094" (2.39mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.209" (5.31mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.093" (2.36mm)
 Diameter - Turret Head: 0.062" (1.57mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2312-300010000070-ND Datasheet
2561-4-00-01-00-00-07-0 2561-4000100000
70-ND		 2561-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2561
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.156" (3.96mm)
 Length - Overall: 0.375" (9.53mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.094" (2.39mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2561-400010000070-ND Datasheet
2710-1-00-01-00-00-07-0 2710-1000100000
70-ND		 2710-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2710
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.159" (4.04mm)
 Length - Below Flange: 0.062" (1.57mm)
 Length - Overall: 0.221" (5.61mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.109" (2.77mm)
 Staking Side OD: 0.090" (2.29mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2710-100010000070-ND Datasheet
2703-4-00-01-00-00-07-0 2703-4000100000
70-ND		 2703-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2703
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.328" (8.33mm)
 Length - Below Flange: 0.167" (4.24mm)
 Length - Overall: 0.495" (12.57mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.120" (3.05mm)
 Staking Side OD: 0.091" (2.31mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3261

 2703-400010000070-ND Datasheet
2309-4-00-01-00-00-07-0 2309-4000100000
70-ND		 2309-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2309
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End, Pin
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.076" (1.93mm)
 Length - Below Flange: 0.287" (7.29mm)
 Length - Overall: 0.363" (9.22mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.078" (1.98mm)
 Diameter - Turret Head: 0.045" (1.14mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2309-400010000070-ND Datasheet
0700-0-00-01-00-00-03-0 0700-0000100000
30-ND		 0700-0-00-01-00
-00-03-0		 Mill-Max Manufacturing Corp.
View more  Series: 0700
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End, Pin
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.158" (4.01mm)
 Length - Below Flange: 0.259" (6.58mm)
 Length - Overall: 0.417" (10.59mm)
 Mounting Type: Through Hole
 Termination: Press-Fit, Barbed
 Flange Diameter: 0.072" (1.83mm)
 Diameter - Turret Head: 0.053" (1.35mm)
 Mounting Hole Diameter: 0.057" (1.45mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 0700-000010000030-ND Datasheet
2512-4-00-01-00-00-07-0 2512-4000100000
70-ND		 2512-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2512
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.344" (8.74mm)
 Length - Overall: 0.563" (14.30mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3249

 2512-400010000070-ND Datasheet
2811-2-00-01-00-00-07-0 2811-2000100000
70-ND		 2811-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2811
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.469" (11.91mm)
 Length - Below Flange: 0.105" (2.67mm)
 Length - Overall: 0.574" (14.58mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.140" (3.56mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.075" (1.91mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.4102

 2811-200010000070-ND Datasheet
2365-1-00-01-00-00-07-0 2365-1000100000
70-ND		 2365-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2365
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.213" (5.41mm)
 Length - Below Flange: 0.053" (1.35mm)
 Length - Overall: 0.266" (6.76mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.051" (1.30mm)
 Staking Side OD: 0.073" (1.85mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2365-100010000070-ND Datasheet
2709-2-07-01-00-00-07-0 2709-2070100000
70-ND		 2709-2-07-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2709
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.281" (7.14mm)
 Length - Below Flange: 0.109" (2.77mm)
 Length - Overall: 0.390" (9.91mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.118" (3.00mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3299

 2709-207010000070-ND Datasheet
2817-4-00-01-00-00-07-0 2817-4000100000
70-ND		 2817-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2817
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.460" (11.68mm)
 Length - Below Flange: 0.165" (4.19mm)
 Length - Overall: 0.625" (15.88mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.145" (3.68mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.4398

 2817-400010000070-ND Datasheet
2311-1-00-01-00-00-07-0 2311-1000100000
70-ND		 2311-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2311
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.186" (4.72mm)
 Length - Below Flange: 0.215" (5.46mm)
 Length - Overall: 0.401" (10.19mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2311-100010000070-ND Datasheet
2702-2-00-01-00-00-07-0 2702-2000100000
70-ND		 2702-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2702
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.281" (7.14mm)
 Length - Below Flange: 0.105" (2.67mm)
 Length - Overall: 0.386" (9.80mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.109" (2.77mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3031

 2702-200010000070-ND Datasheet
2708-1-00-01-00-00-07-0 2708-1000100000
70-ND		 2708-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2708
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.187" (4.75mm)
 Length - Below Flange: 0.249" (6.32mm)
 Length - Overall: 0.436" (11.07mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.089" (2.26mm), 0.097" (2.46mm)
 Mounting Hole Diameter: 0.120" (3.05mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3213

 2708-100010000070-ND Datasheet
2333-1-00-01-00-00-07-0 2333-1000100000
70-ND		 2333-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: ECS-2333
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.125" (3.18mm)
 Length - Below Flange: 0.103" (2.62mm)
 Length - Overall: 0.228" (5.79mm)
 Mounting Type: Through Hole
 Termination: Press-Fit, Knurled, Swage
 Flange Diameter: 0.090" (2.29mm)
 Diameter - Turret Head: 0.059" (1.50mm)
 Staking Side OD: 0.048" (1.22mm)
 Staking Side ID: 0.026" (0.66mm)
 Mounting Hole Diameter: 0.052" (1.32mm)
 Board Thickness: 0.078" (1.98mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2333-100010000070-ND Datasheet
2365-2-00-01-00-00-07-0 2365-2000100000
70-ND		 2365-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2365
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.213" (5.41mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.297" (7.54mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.051" (1.30mm)
 Staking Side OD: 0.073" (1.85mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2365-200010000070-ND Datasheet
2501-2-00-01-00-00-07-0 2501-2000100000
70-ND		 2501-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2501
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.109" (2.77mm)
 Length - Overall: 0.328" (8.33mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.093" (2.36mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2501-200010000070-ND Datasheet
2505-4-00-01-00-00-07-0 2505-4000100000
70-ND		 2505-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2505
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.187" (4.75mm)
 Length - Below Flange: 0.156" (3.96mm)
 Length - Overall: 0.343" (8.71mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.097" (2.46mm)
 Staking Side OD: 0.071" (1.80mm)
 Staking Side ID: 0.043" (1.09mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2505-400010000070-ND Datasheet
2815-4-00-01-00-00-07-0 2815-4000100000
70-ND		 2815-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2815
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.187" (4.75mm)
 Length - Below Flange: 0.165" (4.19mm)
 Length - Overall: 0.352" (8.94mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.141" (3.58mm)
 Staking Side OD: 0.109" (2.77mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.113" (2.87mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3374

 2815-400010000070-ND Datasheet
2333-2-00-01-00-00-07-0 2333-2000100000
70-ND		 2333-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: ECS-2333
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.125" (3.18mm)
 Length - Below Flange: 0.087" (2.21mm)
 Length - Overall: 0.212" (5.39mm)
 Mounting Type: Through Hole
 Termination: Press-Fit, Knurled, Swage
 Flange Diameter: 0.090" (2.29mm)
 Diameter - Turret Head: 0.059" (1.50mm)
 Staking Side OD: 0.048" (1.22mm)
 Staking Side ID: 0.026" (0.66mm)
 Mounting Hole Diameter: 0.052" (1.32mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2333-200010000070-ND Datasheet
Hot Searches: non-inverting logic driver logical non-inverting driver non-inverting logic buffer non-inverting logic transceiver logic non-inverting buffer logic non-inverting transceiver non-inverted logic converter non-inverting logic converter non-inverted gate driver inverting logic driver non-inverting line driver non-inverting latch ic non-inverted trigger non-inverting flip-flop non-inverted shift register non-inverting level shifter analog logic inverter dialog logic inverter diode logic inverter microchip logic inverter