Contact Us:00852-30501886 Email:sales@allicdata.com
Sitemap How to buy Login / Register
USD
USA EN
Cart(0)
Products Manufacturers Authorized Agent Send RFQ Blog（news） About us
Home> Products>

Search Result:non-inverting logic driver

 --1188 Item(s) In Category:Terminals - Turret Connectors

Related Categories

Connectors, Interconnects
Card Edge Connectors - Edgeboa...
Circular Connectors - Housings
Terminal Blocks - Headers, Plu...
D-Sub Connectors
Circular Connectors - Backshel...
Backplane Connectors - Special...
Terminals - Quick Connects, Qu...
Terminals - Rectangular Connec...
Terminals - Ring Connectors
Terminals - PC Pin, Single Pos...
D-Sub, D-Shaped Connectors - H...
Circular Connectors - Accessor...
Terminals - Turret Connectors
Coaxial Connectors (RF)
FFC, FPC (Flat Flexible) Conne...
Terminals - Wire Splice Connec...
Backplane Connectors - Hard Me...
Backplane Connectors - ARINC
Rectangular Connectors - Array...
Circular Connectors - Adapters
Terminals - Spade Connectors
D-Shaped Connectors - Centroni...
Rectangular Connectors - Housi...
Rectangular Connectors - Heade...
Integrated Circuits (ICs)
Memory
Embedded - FPGAs (Field Progra...
Interface - Drivers, Receivers...
Logic - Buffers, Drivers, Rece...
Logic - Gates and Inverters
PMIC - Voltage Regulators - DC...
PMIC - Gate Drivers
PMIC - LED Drivers
PMIC - Power Distribution Swit...
Data Acquisition - Digital Pot...
PMIC - Motor Drivers, Controll...
Logic - Flip Flops
Embedded - CPLDs (Complex Prog...
Embedded - DSP (Digital Signal...
Logic - Latches
Embedded - System On Chip (SoC...
Logic - Counters, Dividers
Logic - Shift Registers
Logic - Translators, Level Shi...
Logic - Specialty Logic
PMIC - Voltage Regulators - Li...
Logic - Gates and Inverters - ...
PMIC - Full, Half-Bridge Drive...
Capacitors
Tantalum Capacitors
Aluminum Electrolytic Capacito...
Tantalum - Polymer Capacitors
Mica and PTFE Capacitors
Thin Film Capacitors
Film Capacitors
Switches
Toggle Switches
Rotary Switches
Tactile Switches
Accessories - Caps
Configurable Switch Components...
Slide Switches
Keylock Switches
Circuit Protection
TVS - Diodes
Fuses
Electrical, Specialty Fuses
TVS - Thyristors
Fuseholders
Relays
Power Relays, Over 2 Amps
Signal Relays, Up to 2 Amps
Reed Relays
Inductors, Coils, Chokes
Fixed Inductors
Power Supplies - Board Mount
DC DC Converters
Cable Assemblies
D-Sub Cables
Rectangular Cable Assemblies
Resistors
Through Hole Resistors
Chassis Mount Resistors
Power Supplies - External/Intern...
LED Drivers
Development Boards, Kits, Progra...
Evaluation Boards - DC/DC &...
Evaluation and Demonstration B...
Evaluation Boards - LED Driver...
Potentiometers, Variable Resisto...
Trimmer Potentiometers
Rotary Potentiometers, Rheosta...
Discrete Semiconductor Products
Thyristors - SCRs
Thyristors - TRIACs
Thyristors - SCRs - Modules
Transistors - FETs, MOSFETs - ...
Power Driver Modules
Transistors - IGBTs - Modules
RF/IF and RFID
RF Shields
RFI and EMI - Shielding and Ab...
Audio Products
Alarms, Buzzers, and Sirens
Cables, Wires - Management
Spiral Wrap, Expandable Sleevi...
Solder Sleeve
Boxes, Enclosures, Racks
Rack Components
Racks
Isolators
Isolators - Gate Drivers
Tools
Crimpers, Applicators, Presses
Optoelectronics
Fiber Optics - Transmitters - ...
Panel Indicators, Pilot Lights
Test and Measurement
Test Leads - Banana, Meter Int...
Cables, Wires
Single Conductor Cables (Hook-...
Uncategorized
Miscellaneous
Photo Allicdata Part# Mft.Part# Company Spec. QTY. Pricing(USD) PDF
2308-3-00-01-00-00-07-0 2308-3000100000
70-ND		 2308-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2308
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.156" (3.96mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.271" (6.88mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.061" (1.55mm)
 Staking Side OD: 0.061" (1.55mm)
 Staking Side ID: 0.044" (1.12mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2308-300010000070-ND Datasheet
2513-2-00-01-00-00-07-0 2513-2000100000
70-ND		 2513-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2513
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.188" (4.78mm)
 Length - Below Flange: 0.094" (2.39mm)
 Length - Overall: 0.282" (7.16mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.060" (1.52mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.041" (1.04mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2513-200010000070-ND Datasheet
2113-4-00-01-00-00-07-0 2113-4000100000
70-ND		 2113-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2113
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.094" (2.39mm)
 Length - Below Flange: 0.147" (3.73mm)
 Length - Overall: 0.241" (6.12mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.062" (1.57mm)
 Diameter - Turret Head: 0.040" (1.02mm)
 Staking Side OD: 0.040" (1.02mm)
 Staking Side ID: 0.026" (0.66mm)
 Mounting Hole Diameter: 0.043" (1.09mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2113-400010000070-ND Datasheet
2316-2-00-01-00-00-07-0 2316-2000100000
70-ND		 2316-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2316
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.151" (3.84mm)
 Length - Below Flange: 0.094" (2.39mm)
 Length - Overall: 0.245" (6.22mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.060" (1.52mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.042" (1.07mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2316-200010000070-ND Datasheet
2316-4-00-01-00-00-07-0 2316-4000100000
70-ND		 2316-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2316
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.151" (3.84mm)
 Length - Below Flange: 0.156" (3.96mm)
 Length - Overall: 0.307" (7.80mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.060" (1.52mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.042" (1.07mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2316-400010000070-ND Datasheet
2365-4-00-01-00-00-07-0 2365-4000100000
70-ND		 2365-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2365
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.213" (5.41mm)
 Length - Below Flange: 0.147" (3.73mm)
 Length - Overall: 0.360" (9.14mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.051" (1.30mm)
 Staking Side OD: 0.073" (1.85mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2365-400010000070-ND Datasheet
2702-1-00-01-00-00-07-0 2702-1000100000
70-ND		 2702-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2702
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.281" (7.14mm)
 Length - Below Flange: 0.075" (1.91mm)
 Length - Overall: 0.356" (9.04mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.109" (2.77mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3219

 2702-100010000070-ND Datasheet
2561-3-00-01-00-00-07-0 2561-3000100000
70-ND		 2561-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2561
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.125" (3.18mm)
 Length - Overall: 0.344" (8.74mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.094" (2.39mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2561-300010000070-ND Datasheet
2710-4-00-01-00-00-07-0 2710-4000100000
70-ND		 2710-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2710
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.159" (4.04mm)
 Length - Below Flange: 0.156" (3.96mm)
 Length - Overall: 0.315" (8.00mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.109" (2.77mm)
 Staking Side OD: 0.090" (2.29mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2710-400010000070-ND Datasheet
2301-3-00-01-00-00-07-0 2301-3000100000
70-ND		 2301-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2301
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.093" (2.36mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.208" (5.28mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.063" (1.60mm)
 Staking Side OD: 0.062" (1.57mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.067" (1.70mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2301-300010000070-ND Datasheet
2708-4-00-01-00-00-07-0 2708-4000100000
70-ND		 2708-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2708
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.187" (4.75mm)
 Length - Below Flange: 0.343" (8.71mm)
 Length - Overall: 0.530" (13.46mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.089" (2.26mm), 0.097" (2.46mm)
 Mounting Hole Diameter: 0.120" (3.05mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.353

 2708-400010000070-ND Datasheet
2307-2-00-01-00-00-07-0 2307-2000100000
70-ND		 2307-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2307
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single, Double
 Length - Above Board: 0.186" (4.72mm)
 Length - Below Flange: 0.164" (4.17mm)
 Length - Overall: 0.350" (8.89mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.072" (1.83mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2307-200010000070-ND Datasheet
2821-3-00-01-00-00-07-0 2821-3000100000
70-ND		 2821-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2821
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.422" (10.72mm)
 Length - Below Flange: 0.141" (3.58mm)
 Length - Overall: 0.563" (14.30mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.152" (3.86mm)
 Staking Side OD: 0.122" (3.10mm)
 Staking Side ID: 0.089" (2.26mm)
 Mounting Hole Diameter: 0.125" (3.18mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.4305

 2821-300010000070-ND Datasheet
2506-1-00-01-00-00-07-0 2506-1000100000
70-ND		 2506-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2506
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.156" (3.96mm)
 Length - Below Flange: 0.053" (1.35mm)
 Length - Overall: 0.209" (5.31mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.093" (2.36mm)
 Staking Side OD: 0.062" (1.57mm)
 Staking Side ID: 0.043" (1.09mm)
 Mounting Hole Diameter: 0.067" (1.70mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2506-100010000070-ND Datasheet
2513-1-00-01-00-00-07-0 2513-1000100000
70-ND		 2513-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2513
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.188" (4.78mm)
 Length - Below Flange: 0.062" (1.57mm)
 Length - Overall: 0.250" (6.35mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.060" (1.52mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.041" (1.04mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2513-100010000070-ND Datasheet
2803-4-00-01-00-00-07-0 2803-4000100000
70-ND		 2803-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2803
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.187" (4.75mm)
 Length - Below Flange: 0.171" (4.34mm)
 Length - Overall: 0.358" (9.09mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.140" (3.56mm)
 Staking Side OD: 0.110" (2.79mm)
 Staking Side ID: 0.067" (1.70mm)
 Mounting Hole Diameter: 0.113" (2.87mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3413

 2803-400010000070-ND Datasheet
2801-3-00-01-00-00-07-0 2801-3000100000
70-ND		 2801-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2801
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.360" (9.14mm)
 Length - Below Flange: 0.141" (3.58mm)
 Length - Overall: 0.501" (12.73mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.145" (3.68mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.377

 2801-300010000070-ND Datasheet
2304-4-00-01-00-00-07-0 2304-4000100000
70-ND		 2304-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2304
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.104" (2.64mm)
 Length - Below Flange: 0.145" (3.68mm)
 Length - Overall: 0.249" (6.32mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.072" (1.83mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2304-400010000070-ND Datasheet
2524-4-00-01-00-00-07-0 2524-4000100000
70-ND		 2524-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2524
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Triple
 Length - Above Board: 0.340" (8.64mm)
 Length - Below Flange: 0.165" (4.19mm)
 Length - Overall: 0.505" (12.83mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.094" (2.39mm)
 Staking Side OD: 0.087" (2.21mm)
 Staking Side ID: 0.055" (1.40mm)
 Mounting Hole Diameter: 0.092" (2.34mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3192

 2524-400010000070-ND Datasheet
2304-3-00-01-00-00-07-0 2304-3000100000
70-ND		 2304-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2304
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.104" (2.64mm)
 Length - Below Flange: 0.113" (2.87mm)
 Length - Overall: 0.217" (5.51mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.072" (1.83mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2304-300010000070-ND Datasheet
2804-4-00-01-00-00-07-0 2804-4000100000
70-ND		 2804-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2804
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.328" (8.33mm)
 Length - Below Flange: 0.171" (4.34mm)
 Length - Overall: 0.499" (12.67mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.146" (3.71mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.078" (1.98mm)
 Mounting Hole Diameter: 0.118" (3.00mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3635

 2804-400010000070-ND Datasheet
2113-2-00-01-00-00-07-0 2113-2000100000
70-ND		 2113-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2113
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.094" (2.39mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.178" (4.52mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.062" (1.57mm)
 Diameter - Turret Head: 0.040" (1.02mm)
 Staking Side OD: 0.040" (1.02mm)
 Staking Side ID: 0.026" (0.66mm)
 Mounting Hole Diameter: 0.043" (1.09mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2113-200010000070-ND Datasheet
2704-2-00-01-00-00-07-0 2704-2000100000
70-ND		 2704-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2704
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.328" (8.33mm)
 Length - Below Flange: 0.105" (2.67mm)
 Length - Overall: 0.433" (11.00mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.109" (2.77mm)
 Staking Side OD: 0.078" (1.98mm)
 Staking Side ID: 0.055" (1.40mm)
 Mounting Hole Diameter: 0.082" (2.08mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3145

 2704-200010000070-ND Datasheet
2512-1-00-01-00-00-07-0 2512-1000100000
70-ND		 2512-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2512
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.250" (6.35mm)
 Length - Overall: 0.469" (11.90mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.322

 2512-100010000070-ND Datasheet
2812-4-00-01-00-00-07-0 2812-4000100000
70-ND		 2812-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2812
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.360" (9.14mm)
 Length - Below Flange: 0.542" (13.77mm)
 Length - Overall: 0.902" (22.91mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.082" (2.08mm), 0.145" (3.68mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.188" (4.78mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.5115

 2812-400010000070-ND Datasheet
2816-3-00-01-00-00-07-0 2816-3000100000
70-ND		 2816-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2816
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.187" (4.75mm)
 Length - Below Flange: 0.141" (3.58mm)
 Length - Overall: 0.328" (8.33mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.171" (4.34mm)
 Diameter - Turret Head: 0.073" (1.85mm)
 Staking Side OD: 0.112" (2.84mm)
 Staking Side ID: 0.083" (2.11mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3144

 2816-300010000070-ND Datasheet
2706-4-00-01-00-00-07-0 2706-4000100000
70-ND		 2706-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2706
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End, Pin
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.219" (5.56mm)
 Length - Below Flange: 0.375" (9.53mm)
 Length - Overall: 0.594" (15.09mm)
 Mounting Type: Through Hole
 Termination: Swage, Knurled
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.093" (2.36mm), 0.094" (2.39mm)
 Mounting Hole Diameter: 0.120" (3.05mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3395

 2706-400010000070-ND Datasheet
2111-2-00-01-00-00-07-0 2111-2000100000
70-ND		 2111-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2111
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.070" (1.78mm)
 Length - Below Flange: 0.084" (2.13mm)
 Length - Overall: 0.154" (3.91mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.047" (1.19mm)
 Diameter - Turret Head: 0.032" (0.81mm)
 Staking Side OD: 0.030" (0.76mm)
 Staking Side ID: 0.020" (0.51mm)
 Mounting Hole Diameter: 0.033" (0.84mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2111-200010000070-ND Datasheet
2702-3-00-01-00-00-07-0 2702-3000100000
70-ND		 2702-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2702
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.281" (7.14mm)
 Length - Below Flange: 0.135" (3.43mm)
 Length - Overall: 0.416" (10.57mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.109" (2.77mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3043

 2702-300010000070-ND Datasheet
2812-1-00-01-00-00-07-0 2812-1000100000
70-ND		 2812-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2812
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.360" (9.14mm)
 Length - Below Flange: 0.417" (10.59mm)
 Length - Overall: 0.777" (19.74mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.187" (4.75mm)
 Diameter - Turret Head: 0.082" (2.08mm), 0.145" (3.68mm)
 Mounting Hole Diameter: 0.116" (2.95mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.4765

 2812-100010000070-ND Datasheet
2329-4-00-01-00-00-07-0 2329-4000100000
70-ND		 2329-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2329
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.250" (6.35mm)
 Length - Below Flange: 0.156" (3.96mm)
 Length - Overall: 0.406" (10.30mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.062" (1.57mm)
 Staking Side OD: 0.062" (1.57mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.067" (1.70mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2329-400010000070-ND Datasheet
2551-4-00-01-00-00-07-0 2551-4000100000
70-ND		 2551-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2551
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.237" (6.02mm)
 Length - Below Flange: 0.165" (4.19mm)
 Length - Overall: 0.402" (10.20mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.125" (3.18mm)
 Diameter - Turret Head: 0.094" (2.39mm)
 Staking Side OD: 0.090" (2.29mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2551-400010000070-ND Datasheet
2703-2-00-01-00-00-07-0 2703-2000100000
70-ND		 2703-2-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2703
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.328" (8.33mm)
 Length - Below Flange: 0.107" (2.72mm)
 Length - Overall: 0.435" (11.05mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.156" (3.96mm)
 Diameter - Turret Head: 0.120" (3.05mm)
 Staking Side OD: 0.091" (2.31mm)
 Staking Side ID: 0.064" (1.63mm)
 Mounting Hole Diameter: 0.094" (2.39mm)
 Board Thickness: 0.062" (1.57mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2703-200010000070-ND Datasheet
2317-4-00-01-00-00-07-0 2317-4000100000
70-ND		 2317-4-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2317
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.173" (4.39mm)
 Length - Below Flange: 0.156" (3.96mm)
 Length - Overall: 0.329" (8.36mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.060" (1.52mm)
 Staking Side OD: 0.060" (1.52mm)
 Staking Side ID: 0.042" (1.07mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.125" (3.18mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2317-400010000070-ND Datasheet
2111-3-00-01-00-00-07-0 2111-3000100000
70-ND		 2111-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2111
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.070" (1.78mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.185" (4.70mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.047" (1.19mm)
 Diameter - Turret Head: 0.032" (0.81mm)
 Staking Side OD: 0.030" (0.76mm)
 Staking Side ID: 0.020" (0.51mm)
 Mounting Hole Diameter: 0.033" (0.84mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2111-300010000070-ND Datasheet
2325-3-00-01-00-00-07-0 2325-3000100000
70-ND		 2325-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2325
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.109" (2.77mm)
 Length - Below Flange: 0.115" (2.92mm)
 Length - Overall: 0.224" (5.69mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.070" (1.78mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.073" (1.85mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2325-300010000070-ND Datasheet
2110-1-00-01-00-00-07-0 2110-1000100000
70-ND		 2110-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2110
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.230" (5.84mm)
 Length - Below Flange: 0.049" (1.24mm)
 Length - Overall: 0.279" (7.09mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.070" (1.77mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Staking Side OD: 0.047" (1.19mm)
 Staking Side ID: 0.029" (0.74mm)
 Mounting Hole Diameter: 0.052" (1.32mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2110-100010000070-ND Datasheet
2301-1-00-01-00-00-07-0 2301-1000100000
70-ND		 2301-1-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2301
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Single End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.093" (2.36mm)
 Length - Below Flange: 0.053" (1.35mm)
 Length - Overall: 0.146" (3.71mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.063" (1.60mm)
 Staking Side OD: 0.062" (1.57mm)
 Staking Side ID: 0.046" (1.17mm)
 Mounting Hole Diameter: 0.067" (1.70mm)
 Board Thickness: 0.031" (0.79mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2301-100010000070-ND Datasheet
2309-3-00-01-00-00-07-0 2309-3000100000
70-ND		 2309-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2309
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End, Pin
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Single
 Length - Above Board: 0.076" (1.93mm)
 Length - Below Flange: 0.255" (6.48mm)
 Length - Overall: 0.331" (8.41mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.078" (1.98mm)
 Diameter - Turret Head: 0.045" (1.14mm)
 Mounting Hole Diameter: 0.064" (1.63mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2309-300010000070-ND Datasheet
2311-3-00-01-00-00-07-0 2311-3000100000
70-ND		 2311-3-00-01-00
-00-07-0		 Mill-Max Manufacturing Corp.
View more  Series: 2311
 Part Status: Active
 Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
 Terminal Type: Double End
 Moisture Sensitivity Level (MSL): 1 (Unlimited)
 Number of Turrets: Double
 Length - Above Board: 0.186" (4.72mm)
 Length - Below Flange: 0.277" (7.04mm)
 Length - Overall: 0.463" (11.76mm)
 Mounting Type: Through Hole
 Termination: Swage
 Flange Diameter: 0.094" (2.39mm)
 Diameter - Turret Head: 0.050" (1.27mm)
 Mounting Hole Diameter: 0.076" (1.93mm)
 Board Thickness: 0.094" (2.39mm)
 Contact Material: Brass Alloy
 Contact Finish: Tin-Lead
 Contact Finish Thickness: 200.0in (5.08m)
 Insulation: Non-Insulated
1000
Order

1000+:

$0.3024

 2311-300010000070-ND Datasheet
Hot Searches: non-inverting logic driver logical non-inverting driver non-inverting logic buffer non-inverting logic transceiver logic non-inverting buffer logic non-inverting transceiver non-inverted logic converter non-inverting logic converter non-inverted gate driver inverting logic driver non-inverting line driver non-inverting latch ic non-inverting level shifter non-inverted trigger non-inverting flip-flop non-inverted shift register analog logic inverter dialog logic inverter diode logic inverter microchip logic inverter