Integrated circuit socket
On 2018-08-24 10:46:22 in Relays
Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...
Types and detection methods of switching devices
On 2018-11-01 16:57:50 in Relays
The switch is the component that completes the electrical connection and disconnection through a certain action,which is generally connected in series to realize the transmission and control of signal and electric energy ...
The types and characteristics of solder wave crests
On 2018-10-30 11:38:53 in Relays
let the solder joints get reliable wetting;the stationary tin wave at the rear is perfect for further trimming the solder joints that have been wettable but irregular in shape ...
If there is no same type of pipe in use, how to replace it?
On 2018-10-26 15:50:14 in Relays
Diodes are generally not good repair, damage can only be replaced. In selecting diodes, we should pay attention to the following principles. ...
What is a transient voltage suppressor diode ( TVS )?
On 2018-10-26 16:57:28 in Relays
Transient voltage suppressor diode is a new type of overvoltage safety protection device. The utility model has the advantages of small size ...
What is a monochrome LED dot matrix display?
On 2018-10-29 15:27:20 in Relays
Excellent LED dot matrix display is a monochrome light-emitting diode in accordance with the structure of rows and columns ...
Transistor FET
On 2018-08-24 11:08:36 in Relays
The appearance of the public field effect transistor is shown in Fig.First, the classification of FET. ...
Electret capacitive microphone
On 2018-11-01 14:19:07 in Relays
To measure the secondary coil of the output transformer,it can be measured directly with the two surface pen to check the output end of the city ...
Sequential logic circuit register
On 2018-08-28 17:30:45 in Relays
it cannot be started. Indicates whether the number of valid cycles is an increment counter or a decrement counter, and the mode (count length) function of the state machine (counter), such as a decimal number. ...
What is a transistor? What's the role?
On 2018-10-27 10:46:55 in Relays
Transistors are also called semiconductor diodes,which can be said to be the most important devices in electronic circuits ...
What is a Schottky diode? How to detect?
On 2018-10-26 15:54:21 in Relays
Schottky diode is a low-power, high-current,ultra-high-speed semiconductor device, reverse recovery time trr can be small to a few nanoseconds ...
The resistance between 2E and C
On 2018-10-27 11:00:40 in Relays
The resistance between 2E and C.Silicon tube is almost infinite size power pin tube in the tens of thousands of euros,high-power wrong tube in the hundreds of Europe.If the measured resistance is zero ...
What is a reed pipe and dry reed relay and how to detect them?
On 2018-12-27 13:51:03 in Relays
This article introduces reed pipe and dry reed relay ...
How to prevent solid-state relay and equipment failure!
On 2018-12-17 11:51:59 in Relays
The article explores how to prevent solid-state relay and equipment failure! ...
Different role of reed relay and solid state relay
On 2019-01-04 11:43:43 in Relays
This article describes the role of reed relay and solid state relay ...
The identification of model and pin
On 2018-11-01 16:51:26 in Relays
Because the number of LED digital tube is not unified,it can be said that there are no rules to follow ...
Four wave soldering daily maintenance and maintenance knowledge
On 2018-10-30 11:01:43 in Relays
Four wave soldering daily maintenance and maintenance knowledge 1 regularly check the heating pipe voltage is normal,too high voltage will damage the heating pipe. ...
What is a damped line output transistor?
On 2018-10-27 11:06:35 in Relays
The line output high power transistor with a damping transistor is a special tube in the output circuit of the television.Figure 6A shows the internal structure and equivalent circuit of the output transistor with damping line ...
Variable capacitance diode, step recovery diode, bidirectional trigger diode
On 2018-08-24 10:57:12 in Relays
It is usually used to trigger bidirectional thyristors, or to form an overvoltage protection circuit. ...
How to identify and detect relays?
On 2018-12-20 14:13:55 in Relays
This article describes how to identify and detect relays ...
Basic SR latch trigger
On 2018-08-28 17:26:28 in Relays
State transition diagram is a common tool in sequential logic circuits. It writes states in circles, arrows indicate the direction of state transition, and transition conditions are written next to arrows. ...
Identification and detection of capacitance components
On 2018-08-22 12:26:48 in Relays
Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...
What is the basic principle of sonar signal simulator based on DDS technology?
On 2021-03-20 11:13:27 in Relays
This article describes the characteristics of the digital circuits in signal simulator. ...
what is a solid state relay (SSR)?
On 2018-12-25 13:11:35 in Relays
This article writes about the solid state relay (SSR) ...
How Solid-State Relays (SSRs) Faces Overheat Challenge?
On 2018-12-18 13:26:35 in Relays
This article describes How Solid-State Relays (SSRs) Faces Overheat Challenge ...