Integrated circuit socket
On 2018-08-24 10:46:22 in Relays
Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...
Classification of capacitors
On 2018-10-30 11:59:35 in Relays
According to function.It can be divided into polyester capacitor,mica capacitor,high frequency ceramic capacitor,monolithic capacitor ...
Identification and detection of capacitance components
On 2018-08-22 12:26:48 in Relays
Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...
What is the basic principle of sonar signal simulator based on DDS technology?
On 2021-03-20 11:13:27 in Relays
Sequential logic circuit register
On 2018-08-28 17:30:45 in Relays
it cannot be started. Indicates whether the number of valid cycles is an increment counter or a decrement counter, and the mode (count length) function of the state machine (counter), such as a decimal number. ...
Types and detection methods of switching devices
On 2018-11-01 16:57:50 in Relays
The switch is the component that completes the electrical connection and disconnection through a certain action,which is generally connected in series to realize the transmission and control of signal and electric energy ...
The identification of model and pin
On 2018-11-01 16:51:26 in Relays
Because the number of LED digital tube is not unified,it can be said that there are no rules to follow ...
how to detect the four end small power thyristor?
On 2018-10-29 15:00:02 in Relays
To detect the unidirectional conductivity of PN junction,the multimeter is placed in RX 1K block,and the positive and negative resistance between A-GA,GKGA and Gk-K are measured. ...
Potentiometer detection and resistance detection
On 2018-08-22 12:04:06 in Relays
The actual resistance value can be measured by connecting two forms (no positive or negative) to the two ends of the resistor respectively. ...
What is a reed pipe and dry reed relay and how to detect them?
On 2018-12-27 13:51:03 in Relays
Plug-in of electronic components
On 2018-11-01 13:51:17 in Relays
Manual insertion and welding should be first inserted into those components that need to be mechanically fixed,such as the power device radiator,bracket,clip,etc,and then insert the need to weld fixed components. ...