Diode rectifier filter circuit Diode half wave rectifier circuit
On 2018-08-28 17:36:03 in Relays
Therefore, bridge rectifier has been widely used.Diode half wave rectifier circuit ...
The types and characteristics of solder wave crests
On 2018-10-30 11:38:53 in Relays
let the solder joints get reliable wetting;the stationary tin wave at the rear is perfect for further trimming the solder joints that have been wettable but irregular in shape ...
Four wave soldering daily maintenance and maintenance knowledge
On 2018-10-30 11:01:43 in Relays
Four wave soldering daily maintenance and maintenance knowledge 1 regularly check the heating pipe voltage is normal,too high voltage will damage the heating pipe. ...
how to detect the four end small power thyristor?
On 2018-10-29 15:00:02 in Relays
To detect the unidirectional conductivity of PN junction,the multimeter is placed in RX 1K block,and the positive and negative resistance between A-GA,GKGA and Gk-K are measured. ...
If there is no same type of pipe in use, how to replace it?
On 2018-10-26 15:50:14 in Relays
Diodes are generally not good repair, damage can only be replaced. In selecting diodes, we should pay attention to the following principles. ...
Variable capacitance diode, step recovery diode, bidirectional trigger diode
On 2018-08-24 10:57:12 in Relays
It is usually used to trigger bidirectional thyristors, or to form an overvoltage protection circuit. ...
what is a solid state relay (SSR)?
On 2018-12-25 13:11:35 in Relays
This article writes about the solid state relay (SSR) ...
What is the basic principle of sonar signal simulator based on DDS technology?
On 2021-03-20 11:13:27 in Relays
This article describes the characteristics of the digital circuits in signal simulator. ...
What is a Schottky diode? How to detect?
On 2018-10-26 15:54:21 in Relays
Schottky diode is a low-power, high-current,ultra-high-speed semiconductor device, reverse recovery time trr can be small to a few nanoseconds ...
Autotransformer and voltage regulating transformer
On 2018-08-28 17:33:17 in Relays
The common characteristic of transformer is that the DC circuit on both sides is completely separated, and the energy transfer on both sides is coupled by magnetic field. ...
Plug-in of electronic components
On 2018-11-01 13:51:17 in Relays
Manual insertion and welding should be first inserted into those components that need to be mechanically fixed,such as the power device radiator,bracket,clip,etc,and then insert the need to weld fixed components. ...
Diode and transistor detection
On 2018-08-22 12:31:42 in Relays
In identifying and detecting common components, the resistance is the forward resistance of the diode. ...
Electret capacitive microphone
On 2018-11-01 14:19:07 in Relays
To measure the secondary coil of the output transformer,it can be measured directly with the two surface pen to check the output end of the city ...
Integrated circuit socket
On 2018-08-24 10:46:22 in Relays
Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...
How to prevent solid-state relay and equipment failure!
On 2018-12-17 11:51:59 in Relays
The article explores how to prevent solid-state relay and equipment failure! ...
Types and detection methods of switching devices
On 2018-11-01 16:57:50 in Relays
The switch is the component that completes the electrical connection and disconnection through a certain action,which is generally connected in series to realize the transmission and control of signal and electric energy ...
The identification of model and pin
On 2018-11-01 16:51:26 in Relays
Because the number of LED digital tube is not unified,it can be said that there are no rules to follow ...
Identification and detection of capacitance components
On 2018-08-22 12:26:48 in Relays
Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...