2057-09-BT1LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Gas Discharge Tube Arresters (GDT):

Gas Discharge Tube Arresters (GDTs) are devices that are used to protect system circuits, equipment, and components against transients generated by lightning and switching operations. These devices are used to minimize the risk of damaging surges and to prevent hazardous voltage levels on the system. Gas Discharge Tube Arresters are designed to provide a low-impedance path to carry transient energy from an affected system to ground. This article will discuss the application field and working principle of the 2057-09-BT1LF GDT.

Application Field of 2057-09-BT1LF Gas Discharge Tube Arresters:

The 2057-09-BT1LF GDT is designed for AC power systems, telecommunications, and signal processing circuits. This device is used in applications where the transient voltage levels are as high as 4.2 kV. It is also suitable for protecting optical fibers, antennas, and other types of communication equipment from surges. This device has a low residual voltage to suppress over-voltage levels, protecting vulnerable circuits and components.

Working Principle of 2057-09-BT1LF Gas Discharge Tube Arresters:

The 2057-09-BT1LF GDT is designed with an extended voltage range, which results in greater protection from lightning and switching surge voltages. The device has two electrodes which are filled with a gas such as Argon or Nitrogen. The gas acts as an insulator and prevents any damaging current or voltage from flowing to the protected device. When a transient voltage exceeds a certain threshold, the electrons in the gas become ionized, reducing the electrical resistance between the two electrodes and allowing a high-current path to form.

This high-current path is designed to provide a low-impedance path to ground, diverting the surge energy from the protected device or circuit. Once the surge has passed, the electrons in the gas return to their normal, non-ionized state, restoring the insulating properties of the gas and stopping current flow. This process is known as clamping, as the over-voltage is limited or clamped to a safe level.

The 2057-09-BT1LF also utilizes a construction method to minimize the residual voltage of the device. This device is designed with an extended voltage range, resulting in a lower residual voltage. The lower residual voltage helps to reduce the risk of equipment damage or component failure due to over-voltage damage.

Conclusion:

The 2057-09-BT1LF Gas Discharge Tube Arresters are designed for AC power systems, telecommunications, and signal processing circuits, providing protection from transient voltages as high as 4.2 kV. It is designed with an extended voltage range, resulting in a low residual voltage and greater protection from surges. The device employs a gas-filled construction to provide a low impedance path to ground, clamping the surge voltage and diverting the current away from vulnerable circuits and components.

The specific data is subject to PDF, and the above content is for reference