0008500113-11-L2-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires, Pre-Crimped Leads, and 0008500113-11-L2-D application field and working principle

Jumper wires, pre-crimped leads, and 0008500113-11-L2-D are all component parts used in electronics. Each of them has its own specific purpose and application field, as well as their particular working principle.

Jumper Wires

Jumper wires are small pieces of metal or plastic that are used to bridge between two or more pieces of circuitry, isolating one from the other. They are most commonly used as a last resort when all else fails, such as when repairing a circuit board. Jumper wires usually consist of two different alloys, allowing them to be able to adjust to varied temperatures, and are often insulated with a flexible, non-conducting coating.

When using jumper wires, the principal is fairly simple. The solder joints between the devices exist for the route the condensed portions of the circuit. Once the jumper wire is in place, the electrical current can begin flowing through the other electronics. This Application Field is generally found in this area of circuit, where jumpers are used as a last resort to mend broken circuits where a circuit board could not be properly soldered or constructed.

Pre-Crimped Leads

The purpose of crimped leads is to securely attach a wire to a terminal that will be electrically connected to another piece of equipment, without the need for soldering. Pre-crimped leads are designed to provide greater durability, faster production time, and fewer faults. They are easier and faster to install than soldering, providing an efficient and reliable connection. The crimps are made from malleable metals to ensure a tight, secure fit that will stand up to the repeated shorts, sparking, and vibration in harshest environments.

Crimping is achieved by a specialized tool that presses two parts together in order to form a connection. It uses an axial force to deform the metal in a particular direction, compressing it to the terminal’s shape and size, ensuring that it will not dislodge or fail under pressure. It is important to use the proper crimping tool to ensure a correct installation and adequate electrical flow.

0008500113-11-L2-D

0008500113-11-L2-D is a through-hole component used to link electronic components together in a circuit. This component is most commonly used to connect up several pieces of equipment in an unspecified order. The working principle of this component is relatively simple. The metal pins of the component are pushed into the holes of the circuit board and secured with soldering, allowing electrical current from different components to flow freely.

The application fields of this component include any industry that deals with electronic components. This includes the automation, robotics, industrial computing, medical, military, and aerospace fields. This component is also used in consumer electronics, and is becoming increasingly popular due to its low price and high reliability.

In conclusion, there are three main types of components used in electronic circuits: jumper wires, pre-crimped leads and 0008500113-11-L2-D. Each has its own particular purpose and application field, as well as their particular working principle. Jumper wires are used to bridge between two pieces of circuitry, pre-crimped leads are used to securely attach a wire to a terminal that will be electrically connected to another piece of equipment, and 0008500113-11-L2-D is used to link electronic components together in a circuit. These components can be used in a variety of industries, from industrial computing to consumer electronics.

The specific data is subject to PDF, and the above content is for reference