H5BBT-10106-R2 Cable Assemblies

Jumper Wires

Jumper wires are typically short insulated cables that are used to provide conductive paths between different points within an electrical system. They are often used to connect multi-pin headers on unit boards and to make temporary connections between points. Jumper wires may be bare, or may have a plastic insulation that comes in a variety of colors.

Jumper wires are sometimes used to make connections between two electrical systems that have different pin configurations. For example, when connecting a menu system to a drive board, a universal cable with pin adapters may be required. The pins on either side of the jumper wires are of different lengths so that the wires connect securely.

The sizes of jumper wires can vary, and they are typically available in strands or ribbon cables. The length of the stranded cables will depend on the application for which they are being used. The length of ribbon cables is typically evenly spaced across its length.

Pre-Crimped Leads

Pre-crimped leads provide quick and accurate connections between two points within an electrical system. The connection is made through a crimp – a mechanical connection made with a special tool to join the wire ends to a tab or a box. This type of connection is very durable and will maintain its integrity even if exposed to vibration or changes in temperature.

Pre-crimped leads are available in a few standard sizes, as well as custom sizes. To ensure that the connection is secure, it is important to match the lead size to the tab or box to which it is being connected. Pre-crimped leads can help to reduce the amount of time required to complete a project, as well as ensure a secure connection.

The H5BBT-10106-R2 pre-crimped leads are designed for use in applications where the wire has to be securely attached to a PCB. They are available in different lengths and offer superior conductivity and greater flexibility when used in tight spaces. The leads are pre-crimped at the factory and feature tin plating over copper to protect against corrosion.

H5BBT-10106-R2 application field and working principle

The H5BBT-10106-R2 is a pre-crimped lead specifically designed for use in applications where the wire has to be securely attached to a PCB. It is one of the many H5BBT-series from Amphenol Advanced Sensors, a leading company in the field of miniature, radiation hardening sensors for aerospace and military technologies.

This product is especially suited for high-temperature, harsh environmental applications, such as aerospace and defense. It is built using a stainless steel conductor and has a vibration-proof design for reliable performance during operation. The H5BBT pre-crimped lead offers superior conductivity, greater flexibility when used in tight spaces, and superior strain relief.

The H5BBT-10106-R2 pre-crimped lead is available in three different lengths: 3.5mm, 5.5mm, and 8mm. It is fully RoHS compliant and meets the requirements of the European Union’s Reduction of Hazardous Substances Directive (RoHS2). It is also UL listed for improved safety.

The installation of the H5BBT pre-crimped lead is easy and straightforward. All that is required is to strip the insulation off of the end of the wire and insert it into the tab or box that it is being connected to. The solder is pre-cured and can be quickly applied. The crimp can also be quickly applied using Amphenol\'s HX crimp tool, which helps to ensure a secure connection.

The H5BBT-10106-R2 is a highly durable pre-crimped lead that can withstand up to 400 degrees Celsius. It is ideal for applications in harsh environments where high temperatures and vibration are present. Its superior conductivity and flexibility make it an ideal choice for high-temperature connections.