H3BBG-10102-W8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are single-conductor cables that are used to connect two points in an electrical circuit in order to allow an electrical current to flow. They are used extensively in many electronics projects, including the construction of prototype circuits, test jigs, and breadboards. Jumper wires are available in different lengths and come with male or female ends to connect different components in an electrical circuit.

Jumper wires are mainly used to create electrical and mechanical connections in a circuit. Most of the time, they are employed to connect two points with a circuit that needs direct current (DC) or use a common ground. For example, they can be used to bridge a circuit from a power source to a circuit board, to connect test points in a circuit, or to interconnect components on a circuit board.

Pre-Crimped Leads

Pre-crimped leads are special type of cables that mount two or more wires in an enclosed housing. A pre-crimped lead typically has a female connector at one end and a male connector at the other end. They are an excellent choice for electronic applications that require a secure and reliable connection between components. Pre-crimped leads come in different sizes and shapes to accommodate the various applications they are used in.

Pre-crimped leads are commonly used in many electronic applications. They are a reliable source for transmitting electrical power and low-level signals from one component to another. Additionally, they are used in many cases to protect the wires from strain when they come under load, such as when handling heavy equipment. Pre-crimped leads are available in different lengths and gauges, so they are suitable for various applications.

H3BBG-10102-W8 Application Field and Working Principle

The H3BBG-10102-W8 is a jumper wire assembly designed for PCB prototyping and quick troubleshooting. It is a pre-assembled set of male and female connector pins attached to stranded, twisted, stranded, vinyl-insulated 24 AWG (7/0.2 mm) cables. It is available in various lengths and is configured to suit either wire-to-wire or wire-to-board setups.

The jumper consists of three distinct components: the plastic housing, the male and female pins, and the cable connectors. The housings are designed to securely house the pins, the cables, and the solder joints. The male and female pins are made of copper and are same-size, interchangeable connectors. The cable connectors are constructed with insulated strands of copper wire, and they are designed to provide a reliable link between the pins.

The H3BBG-10102-W8 is suitable for applications such as prototyping circuits on a breadboard. It can also be used for establishing and troubleshooting connections between wire-to-wire and wire-to-board systems. Additionally, the jumper is suitable for applications requiring continuous electrical contact since the housings provide strain relief when the wire is placed under load.

The specific data is subject to PDF, and the above content is for reference