DP4RSA60D40

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Solid State)

A contactor is an electrical device used for switching an electrical power circuit. It is frequently used in a control system, usually for loads such as motors, resistive heaters, or lights. DP4RSA60D40 is a type of contactor used mainly for motor applications. This article will discuss the application field and working principle of DP4RSA60D40.

Application Field

The DP4RSA60D40 contactor is mainly used for motor applications that require frequent switching cycles and large currents. This type of contactor is designed to handle high inrush current associated with motors, and is suitable for use with relays in large systems. It is also suitable for single-phase power supplies, allowing for the switching of single-phase AC loads up to 10 Amps and its related coil triggers.

The DP4RSA60D40 contactor is capable of controlling high horsepower motors used in industrial machines and large equipment. It is well-suited for applications that regularly require switching of machines, such as conveyors, stackers, and automated garage door openers. This type of contactor is also popular for use in HVAC systems, where the low cost and high reliability of the device make it an attractive option.

Working Principle

The DP4RSA60D40 contactor works by using a solid state circuitry, in which the circuit path is completed when the contacts close. When power is supplied to the contactor, a resistor will reduce the voltage found in the contacts, setting them in motion. As the contacts move closer to each other, the normally closed contacts complete the circuit, allowing the current to flow through the contacts and turn on the device.

When the contacts are activated, an electromagnet is engaged which pulls back the contacts. This action causes a spark which jumps across the contacts, heating them and helping to seal the connection. After a few cycles, the contacts can be set so tightly that they will retain the current even when the power is disconnected. The contacts are held in place by a spring, which pushes against the electromagnet to keep the contacts closed.

The DP4RSA60D40 contactor is highly reliable and long-lasting, as it is designed to withstand frequent switching and high currents. It is also relatively cost-effective and can be used in a variety of applications, making it a popular choice for many industries.

The specific data is subject to PDF, and the above content is for reference