DP4RSC60D20B5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Solid State) provide a flexible control capability for a wide variety of applications including the selective control of lighting and motor loads. The contactors (solid state) are also used for switching DC (direct current) and AC (alternating current) power in a circuit. A standard contactor (solid state) consists of two parts; the contactor (solid state) itself and a switch. The switch is designed to control the opening and closing of the contacts within the contactor (solid state).

The DP4RSC60D20B5 is a solid state contactor application field and working principle which is designed for high current loads such as larger motor loads. It is designed to provide reliable switching in a complicated environment, often with limited access to control equipment. The DP4RSC60D20B5 consists of two parts; the contactor (solid state) itself and an external switch. The contactor (solid state) is designed to be driven by an RSC-rated relay which is normally connected to an external (RSC) logic circuit. A logic input to the contactor (solid state) determines whether the contactor should make or break contact with the load or not.

The contactor (solid state) is also equipped with a manual override switch. This provides a direct manual control of the contactor (solid state) allowing switch power control when necessary even in the absence of external control. The contactor (solid state) can be operated in either the “on” or “off” state depending on the design of the logic circuit.

In addition, the contactor (solid state) in the DP4RSC60D20B5 provides protection from voltage surges. This protection allows the contactor (solid state) to switch during accidental short circuits without an excessive stress on the device or other parts of the circuit. The performance of the contactor (solid state) is also optimized for the ultimate safety of its components and the circuitry in which it is used.

The contactor (solid state) should be mounted in a well-ventilated area to ensure the temperatures inside the contactor (solid state) stay within acceptable limits. The DP4RSC60D20B5 is designed to provide reliable switching at a wide range of temperatures, including high temperatures which are common in larger motor loads.

The DP4RSC60D20B5 is an advanced solid-state contactor with superior switching power and reliability. It is designed to provide reliable switching even in tough conditions and it provides protection against voltage surges. It is designed to be driven by an RSC-rated relay which is normally connected to an external (RSC) logic circuit. The contactor (solid state) must be mounted in a well-ventilated area and should be operated within the recommended temperature range for optimal performance and safety. It can be used in a variety of applications to provide reliable switching of larger motor loads and to provide protection from voltage surges.

The specific data is subject to PDF, and the above content is for reference