1048950000

Series:	Omnimate SL
Packaging:	Bulk
Part Status:	Active
Type:	Header, Male Pins, Shrouded (4 Side)
Number of Positions:	10
Positions Per Level:	10
Number of Levels:	1
Pitch:	0.300" (7.62mm)
Header Orientation:	Vertical
Plug Wire Entry:	--
Termination Style:	Solder
Mounting Type:	Through Hole
Current - IEC:	29A
Voltage - IEC:	630V
Current - UL:	20A
Voltage - UL:	300V
Wire Gauge or Range - AWG:	--
Wire Gauge or Range - mm²:	--
Color:	Orange
Operating Temperature:	-50°C ~ 100°C
Contact Mating Finish:	Tin
Features:	--
Material Flammability Rating:	UL94 V-0
Ingress Protection:	IP20
Screw Size:	--
Torque - Screw:	--
Wire Strip Length:	--
Contact Material:	Copper Alloy
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Tail Length:	0.126" (3.20mm)
Insulation Height:	0.464" (11.79mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets

Terminal blocks are ubiquitous electrical components used in a wide variety of commercial and industrial applications for many purposes, including signal transmission, the joining of power and control circuits, and the distribution of electrical power. Terminal blocks can be divided into three categories: headers, plugs, and sockets.

Headers

Headers, also known as blocks or rail terminals, are the most common type of terminal blocks. They are typically used to connect power or signal lines to a printed-circuit board (PCB) or a wire harness. Headers are available in a variety of sizes, configurations, and applications, including power circuits, signal circuits, multifunctional circuits, and ground terminals. Headers consist of a series of conductive metal pins arranged in a row. These pins are connected to the PCB or wire harness by a metal tab, allowing them to be plugged into a board-edge connector. The connection between the pins and the board-edge connector usually uses a soldered connection, though some headers are designed for other types of connections. Headers also have a row of insulation pins that serve as a separator between each series of pins and provide insulation to protect against electric shock.

Plugs and Sockets

Plugs and sockets are commonly used to connect low-voltage or signal circuits. Plugs and sockets are available in a variety of sizes, configurations, and applications, including power circuits, signal circuits, multifunctional circuits, and ground terminals. Plugs and sockets are typically used in applications where the connection is only needed for a short period of time. Plugs and sockets are designed to securely connect to each other, providing a reliable connection. Plugs consists of a series of metal pins on one side that are connected to a board-edge connector on the other side, allowing them to be plugged into a socket. Sockets consist of a series of holes on one side that the pins on the plug fit into. Connections between plugs and sockets can be soldered, but most plugs and sockets use a clamping connection.

1048950000 Application Field and Working Principle

In general, 1048950000 terminal blocks can be used in a wide variety of commercial and industrial applications for many purposes, including signal transmission, the joining of power and control circuits, and the distribution of electrical power. They are used for connecting two or more conductors together and providing electrical insulation between them.The working principle of 1048950000 is fairly simple. The connection between the conductors is completed by inserting the terminals into the appropriate holes in the terminal block and then fastening the terminal block. Once the terminals are in place, a nut can be tightened to compress the contact, providing a reliable electrical connection. Insulation is also provided by the use of special insulators that fit around the terminals and prevent arcing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description