LC88FC3J0AUTJ-2H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Embedded - Microcontrollers

The LC88FC3J0AUTJ-2H embedded microcontroller is a single-chip microcontroller based on the 8-bit 8051 core micro-engine that is embedded onto a single chip. It supports 2K bytes of program memory, 64 bytes of on-chip Data RAM, 128 bytes of on-chip Data EEPROM, 6 Timers/Counters, 16 Interrupt Sources, 3 16-bit Compare/Capture Modules, and an 8-bit UART. This single chip microcontroller is widely used in embedded control applications such as motor drives, motion control, logic control, and home and industrial automation.

Application Field

The LC88FC3J0AUTJ-2H embedded microcontroller is used in a variety of embedded control applications and is best suited for low-cost, low-power, and low-performance applications. The LC88FC3J0AUTJ-2H is an ideal chip for applications where cost, power consumption and size considerations outweigh performance demands. Its small size, low cost, and low power consumption make it a popular choice in embedded control applications such as motor drives, motion control, logic control, and home and industrial automation.

• Motor drives and motion control: The LC88FC3J0AUTJ-2H is capable of controlling multiple motors simultaneously and can be used in applications such as servos and steppers. It can also be used for applications such as speed control and position control, and can be used for industrial automation and robotic control.
• Logic control: The LC88FC3J0AUTJ-2H supports a large number of logic operations that can be used to control and monitor various processes. It can be used for simple time delays and complex operations such as combinational and state machine operations.
• Home and industrial automation: The LC88FC3J0AUTJ-2H can be used for a variety of home and industrial automation applications including climate control, lighting control, access control, and security. It can also be used for remote control systems such as telemetry systems.

Working Principle

The LC88FC3J0AUTJ-2H is an 8-bit 8051-based microcontroller, meaning that it employs an 8-bit processor core. Its working principle is based on the 8051 architecture and is designed to support programming in a high-level language such as Embedded C or Assembly language. The working principle of the LC88FC3J0AUTJ-2H involves the utilization of an 8-bit data bus and a 16-bit address bus. The data bus transmits data between the processor core and the memory, while the address bus is used to access memory locations. The 8-bit processor core of the LC88FC3J0AUTJ-2H is capable of executing up to 55 instructions per instruction cycle.

The LC88FC3J0AUTJ-2H also includes a set of on-chip peripherals that are employed to extend the functionality of the microcontroller and to interact with external devices. The on-chip peripherals consist of two 16-bit timers/counters, three 16-bit compare/capture modules, an 8-bit UART, 64 bytes of Data RAM and 128 bytes of Data EEPROM. These peripherals can be used to perform tasks such as controlling motors, logic operations, home and industrial automation and remote control.

The LC88FC3J0AUTJ-2H has several programmable bits that can be used to configure, monitor and control its behavior. These include memory protection bits, interrupt enable bits, vector bits and various other control bits. The programmable bits can be used to control the behavior of the microcontroller, including the selection of which interrupts will be enabled or disabled and which external devices will be connected to the microcontroller.

The specific data is subject to PDF, and the above content is for reference