ATTINY1616-MBT-VAO

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

The ATTINY1616-MBT-VAO Automotive are members of the tinyAVR® 1-series of microcontrollers, using the AVR® processor with hardware multiplier, running at up to 16 MHz, with 16 KB Flash, 2 KB of SRAM, and 256 bytes of EEPROM in a 14-, 20-, or 24-pin package. The tinyAVR® 1-series uses the latest technologies with a flexible, low-power architecture including Event System and SleepWalking, accurate analog features, and Core Independent Peripherals. Capacitive touch interfaces with driven shield are supported with the integrated QTouch® peripheral touch controller.

2. Features

    1. CPU

        – AVR® CPU

        – Running at up to 16 MHz

        – Single-cycle I/O access

        – Two-level interrupt controller

        – Two-cycle hardware multiplier

    2. Memories

        – 16 KB In-system self-programmable Flash memory

        – 256 bytes EEPROM

        – 2 KB SRAM 

        – Write/erase endurance:

           Flash 10,000 cycles

           EEPROM 100,000 cycles

        – Data retention: 40 years at 55°C

    3. System

        – Power-on Reset (POR)

        – Brown-out Detector (BOD)

        – Clock options:

           1. 16 MHz low-power internal RC oscillator

           2. 32.768 kHz Ultra Low-Power (ULP) internal RC oscillator

           3. 32.768 kHz external crystal oscillator

           4. External clock input

        – Single-pin Unified Program and Debug Interface (UPDI)

        – Three sleep modes:

           1. Idle with all peripherals running for immediate wake-up

           2. Standby

        – Configurable operation of selected peripherals

        – SleepWalking peripherals: Power-Down with full data retention

    4. Peripherals

        – One 16-bit Timer/Counter type A (TCA) with dedicated period register and three compare channels

        – Two 16-bit Timer/Counter type B (TCB) with input capture

        – One 12-bit Timer/Counter type D (TCD) optimized for control applications

        – One 16-bit Real-Time Counter (RTC) running from an external crystal, external clock, or internal RC oscillator

        – Watchdog Timer (WDT) with Window mode, with a separate on-chip oscillator

        – One USART with fractional baud rate generator, auto-baud, and start-of-frame detection

        – One master/slave Serial Peripheral Interface (SPI)

        – One Two-Wire Interface (TWI) with dual address match

           1. Philips I2C compatible

           2. Standard mode (Sm, 100 kHz)

           3. Fast mode (Fm, 400 kHz)

           4. Fast mode plus (Fm+, 1 MHz)

        – Three Analog Comparators (AC) with low propagation delay

        – Two 10-bit 115 ksps Analog-to-Digital Converters (ADC)

        – Three 8-bit Digital-to-Analog Converters (DAC) with one external channel

        – Multiple voltage references (VREF):

           1. 0.55V

           2. 1.1V

           3. 1.5V

           4. 2.5V

           5. 4.3V

        – Event System (EVSYS) for CPU independent and predictable inter-peripheral signaling

        – Configurable Custom Logic (CCL) with two programmable look-up tables

        – Automated CRC memory scan

        – Peripheral Touch Controller (PTC)

           1. Capacitive touch buttons, sliders, wheels and 2D surfaces

           2. Wake-up on touch

           3. Driven shield for improved moisture and noise handling performance

           4. Up to 13 self capacitance channels

           5. Up to 42 mutual capacitance channels

        – External interrupt on all general purpose pins

    5. I/O and Packages:

        – 12/18/21 programmable I/O lines

        – 14-pin SOIC150

        – 20-pin VQFN 3x3 mm with wettable flanks

        – 20-pin SOIC300

        – 24-pin VQFN 4x4 mm with wettable flanks

    6. Temperature Ranges:

        – -40°C to 105°C

        – -40°C to 125°C

    7. Speed Grades:

        – 0-8 MHz @ 2.7V – 5.5V

        – 0-16 MHz @ 4.5V – 5.5V