FODM3082R2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used for electrical coupling. They can be classified as Triac, SCR Output, etc. FODM3082R2 is a high performance optoisolator within the said classification. In this article, we will discuss the application field and working principles of FODM3082R2.

The FODM3082R2 optoisolator is a 4-pin package, containing two LEDs and a Triac semiconductor driver switch. It is specifically designed for AC switching applications and provides bidirectional isolation. The FODM3082R2 provides a noise immunity of up to 8kV/μs and an operating voltage of upto 220VAC/100VAC. This device can be used in motor control applications, HVAC systems and electrical metering systems, as well as in various other AC control applications.

The FODM3082R2 works by using two LEDs--one connected to the input side and one connected to the output side--as photo-emitters and detectors. This means that the input side of the FODM3082R2 acts as an output device, converting incoming electrical signals (current pulses) to light pulses, while the output side acts as an input device, converting the light pulses back to electrical signals. This conversion of electrical signals into light pulses and back, isolates the input side from the output side, ensuring that sensitive electronic components in the output circuit do not get damaged by high voltage spikes or noise. This in turn helps to increase the reliability of the system.

The signal current from the FODM3082R2 input side is coupled to the output side via a Triac driver switch. This switch moves between ON and OFF states depending on the amount of current in the input, allowing the device to control the current flow between the input and output sides. The device features a trigger current level (referred to as “on set current”) which should be above the minimum current required to cause a Triac to switch ON, yet low enough so as to ensure that the optoisolator’s protection circuit is not triggered.

The FODM3082R2 also features an on-state resistance of upto 2kΩ, aiding in the fast switching of the output side. This helps to reduce the operating time required for the Triac to turn ON and OFF, thus increasing the reliability and efficiency of the circuit. Furthermore, the device also features an under-voltage threshold, which helps to protect sensitive electronic components, helping to make the system safer and more reliable.

In conclusion, the FODM3082R2 is a high performance optoisolator with a Triac semiconductor driver switch. It offers enhanced bidirectional isolation and protection against high voltage spikes and noise. The device can be used in various AC control and electrical metering systems, such as motor control applications, HVAC systems and electrical metering systems, which helps to reduce switching times and increase system reliability.

The specific data is subject to PDF, and the above content is for reference