SI8441-C-IS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators are an important type of electrical isolation, providing galvanic insulation between two circuits and protecting against surges and power backflows. Digital isolators are becoming increasingly important for safety applications in a variety of contexts. The Silicon Labs SI8441-C-IS in particular is a popular digital isolator with high performance and low power consumption.

The SI8441-C-IS is specifically designed for applications with 110 mV input and output voltages. The input voltage is typically a data signal, whereas the output voltage is usually a reference or VDD voltage. The SI8441-C-IS uses an advanced CMOS-based technology to provide a high degree of electrical isolation. This technology allows the digital isolator to maintain a secure level of insulation while consuming very little power.

The SI8441-C-IS utilizes “floating channels” to achieve isolation. In this type of circuit, two signaling channels are separated by a barrier that is maintained by electrostatic and capacitive coupling. This effectively creates two distinct networks, each with its own ground reference. When voltage is fed into the input signal side, the device creates an identical signal on the output side, but with an isolating barrier between the two networks. This barrier allows the two circuits to remain isolated while still providing data connectivity.

The SI8441-C-IS is also designed to be highly efficient, consuming only 2.3 mA of power while offering isolation of up to 2500 Vrms. Additionally, the digital isolator supports data rates of up to 10 Mbps, making it suitable for high-speed applications. It also supports a wide range of power supply voltages, from 3.3 to 5 VDC, for compatibility with a variety of operating environments.

The SI8441-C-IS is an ideal digital isolator for applications that require both high performance and low power consumption. It is ideal for a range of safety applications, such as isolating data signals from motor control systems and protecting devices in environments where power surges and backflows are a concern. In addition, it is suitable for applications that require secure isolation with minimal interference from external noise.

The specific data is subject to PDF, and the above content is for reference