ICS7152M-11T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ICS7152M-11T Application Field and Working Principle

The ICS7152M-11T is a versatile clock generator and signal synthesizer device from ICS div of IDT. It is essentially a configurable programmable oscillator with a frequency range of 12.8 kHz to 270 MHz. It can be used for a variety of applications, such as clock signal and data transmission, power conditioners and signal synchronization. It is an extremely cost-effective and efficient solution and can be used in a variety of applications.

The ICS7152M-11T is a 12-bit (33MHz) clock generator, which means it can generate up to 128 different frequencies. It uses programmable clock dividers and multiplexers to control the various frequencies it can generate. There are four onboard outputs which can be used to generate four different clock signals simultaneously. The frequency of the signal is determined by a programming register, which is set using S/PDIF, a two-wire serial digital interface. This allows the user to select any frequency that is within the device’s range.

The ICS7152M-11T also features a wide variety of features that make it a great choice for many different applications. It has an analog output, a low-jitter output and a programmable monitor function. The analog output is used to monitor the frequency of the output signal and can be used to determine the accuracy of the output. The low-jitter output can be used to reduce the noise on the output signal and improve signal accuracy. The programmable monitor function allows the user to set the amount of time that the output signal will remain in a stable state before transitioning to a different frequency, which can be used to reduce the power consumption of the device.

The ICS7152M-11T also includes a wide range of features that make it a great choice for use in many different types of applications. It has an on-chip phase-locked loop (PLL) with a frequency range of 12.8 kHz to 270 MHz. The PLL can be used to synchronize the phase of the output signal with an external clock signal. It also has a programmable clock divider, which can be used to switch between different frequencies as needed. Finally, the ICS7152M-11T also includes an output holdover circuit, which will keep the output signal stable in the event of a power failure.

The ICS7152M-11T is an ideal choice for a variety of applications. It is particularly well-suited for clock signal and data transmission, power conditioners and signal synchronization. It is cost effective, reliable and can be used for a wide variety of different applications. As such, it is a great choice for both professionals and hobbyists alike.

The specific data is subject to PDF, and the above content is for reference