AS5050A-QF_EK_DB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AS5050A-QF-EK-DB Evaluation Boards - Sensors

The AS5050A-QF-EK-DB Evaluation Board is an advanced rotary position sensor with the ability to measure absolute angular position with a resolution of 0.08 angular degrees. This product from AMS AG is a useful sensing tool to be used in applications ranging from motion control to robotics and automotive systems. It is designed with a positioning range of 0 to 360° and a maximum operating angle of 45°. The board also uses a one-track code for improved accuracy over standard analog angular position sensors. In addition, the AS5050A-QF-EK-DB board has a special power-down mode that helps to reduce the power consumption.

The AS5050A-QF-EK-DB Board comprises a full set of features that make it suitable for various applications. These include on-board digital circuitry, an internally regulated voltage source, and software programmability. The board is equipped with an internal voltage regulator that can be set to the required voltage for different types of sensors. It also features an on-board PC interface that can be used to communicate with the board. Finally, the board is designed with an open-source platform that allows users to customize the board according to their needs.

At the heart of the AS5050A-QF-EK-DB Board is a Hall-effect sensor that is composed of a magnetoresistive sensing element and a coil. This sensing element provides an output which varies with the angular position of the magnetized motor shaft. The Hall-effect sensor is coupled with an A/D converter that converts the analog output of the sensor to a digital pulse-width modulated (PWM) signal which is then fed into the on-board digital circuitry. The digital circuitry processes the PWM signal and provides a proportional angular position signal.

The AS5050A-QF-EK-DB Board also features a serial interface which can be used to communicate with other devices. This interface has a 16-bit interface that sends an alternative high/low pulses which are used to read the magnetic field from the Hall-effect sensor at different angles. This data is then used to determine the angular position of the motor shaft.

In addition to being a rotary position sensor, the AS5050A-QF-EK-DB Board is also capable of measuring linear distances. This is done by using non-contact distance measuring sensors. These sensors can measure distances of up to 500 mm with a resolution of 0.1 mm. The board also features a step motor driver that can be programmed to drive stepper motors in order to accurately control the motion of a robotic arm.

The AS5050A-QF-EK-DB Board also features a timestamp counter which can be used to accurately measure the amount of time that the board has been in operation. This is useful in applications where precise timing is required. The board also features on-board pull-up and pull-down resistors for enhanced noise immunity.

Overall, the AS5050A-QF-EK-DB Board is an advanced evaluation board for position sensors. It is designed to provide users with a powerful and versatile tool for measuring absolute angular position. The board is also equipped with various features such as an internal voltage regulator, a PC interface, a serial interface, and a timestamp counter. With all of these features, the AS5050A-QF-EK-DB Board is capable of providing accurate and reliable data for a variety of applications.

The specific data is subject to PDF, and the above content is for reference