SB160A-E3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A single-phase bridge rectifier consists of four diodes connected in a bridge circuit, enabling a five-wire system circuit configuration. An AC voltage source is connected to the bridge terminals, and a DC load is connected to the rectifier output. Single-phase rectifiers have many applications, including rectification of low-power AC supplies and demodulation of signals. The SB160A-E3/73 is a fast recovery rectifier that has been specifically designed for use in high-frequency DC/DC converters and is ideal for use as a switchmode rectifier or freewheeling diode.

The SB160A-E3/73 features a series of features that make it particularly suitable for use in switch mode power supplies. These include a low forward voltage drop that reduces power dissipation in the circuit and increases efficiency, a high-frequency reverse diode with fast recovery and a soft recovery characteristic that reduces the EMI noise generated by the rectifier. The SB160A-E3/73 also features a low leakage current, which is essential for reducing power loss in a power supply design.

To use the SB160A-E3/73, it must first be connected to an AC power source. The four diodes are connected at each corner of the bridge, with the anode connected to the AC supply terminal, and the cathode at each end of the diode connecting to the negative load terminal. A DC load is connected to the rectifier output. When an AC voltage is applied to the bridge, the diodes act as switches that allow electric current to flow from the AC source to the load.

The main working principle of a single-phase bridge rectifier is that when an AC voltage is applied to the bridge, a current will flow through only one of the four diodes, as the other three diodes are reverse biased. When the current through the diode reaches its peak, the diode reaches its peak reverse voltage, and is said to be in the OFF state. As the AC voltage cycle switches between positive and negative, each of the diodes alternately switches ON and OFF, allowing current to flow through the bridge and load. A smooth DC voltage is thus obtained at the rectifier output.

The SB160A-E3/73 is a fast recovery rectifier that features a low forward voltage drop and a high-frequency reverse diode with fast recovery. It is suitable for high-frequency DC/DC converters, serving as a switchmode rectifier or freewheeling diode. Its soft recovery characteristic helps reduce EMI noise generated by the rectifier, while its low leakage current reduces power loss in a power supply design. For these reasons, the SB160A-E3/73 has become a popular choice for single-phase rectifier applications.

The specific data is subject to PDF, and the above content is for reference