0.25 INCH-D-4V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers, and the 0.25 INCH-D-4V Application Field and Working Principle

The 0.25 INCH-D-4V is an advanced pressure transducer offering a wide range of applications in the fields of hydraulics, pneumatics and gas flow. As the name implies, the 0.25 INCH-D-4V is designed to measure pressures up to 0.25 inches in diameter. This enables the device to measure wide-ranging pressures, including compressive and tensile forces.

In general, the 0.25 INCH-D-4V is constructed and operates in much the same fashion as any other pressure transducer. A diaphragm is mounted between an air-filled chamber and the pressure chamber, which is routed to the sensing element. The sensing element can be any one of a number of devices depending on the specific application; most commonly, the sensing element is a strain gauge. When the pressure in the air chamber is changed, the diaphragm moves relative to the sensing element, creating a measurable electrical signal.

A standard 0.25 INCH-D-4V transducer is calibrated at 1250 psi, or 8.7 bar. This measurement is known as its gauge pressure – the force the transducer is able to measure. If pressure in the air-filled chamber is greater or less than the calibration point, the pressure readings become increasingly inaccurate. To provide more accurate readings, the calibration point can be changed and the sensing element can be replaced.

The 0.25 INCH-D-4V can be used in a variety of applications, including industrial automation, gas/liquid flow, hydraulic/pneumatic systems, and others. In each case, the pressure transducer is used to provide accurate and reliable measurements of the system pressure. Industrial automation applications, for example, may use the transducer to monitor the pressure in the system and provide the necessary feedback control to ensure optimal performance.

In gas/liquid flow applications, the 0.25 INCH-D-4V is used to measure the differential pressure between two points. This is commonly used in pipelines or air conditioning systems to measure the pressure in the system and ensure that the correct amount of pressure is being maintained. The 0.25 INCH-D-4V is also used in hydraulic and pneumatic systems, where the pressure transducer measures the fluid pressure at each point in the system.

The 0.25 INCH-D-4V is an extremely reliable and versatile pressure transducer that is well suited for a wide range of applications. It is designed to provide accurate measurements over a wide range of pressures, and is easy to configure and install. With its wide range of applications, the 0.25 INCH-D-4V is well positioned to meet the needs of modern industrial and automotive applications.

The specific data is subject to PDF, and the above content is for reference