0002062101-04-Y0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper wires are small electrical conductors that are used to make an electrical connection between two different parts of a circuit. They are commonly used to carry a small current to a circuit board or other electronic device. They usually consist of a lead conductor, such as a wire, that can easily be cut to the required length and connected to other elements of the circuit. The end of the wire is usually pre-crimped onto a connector such as a splice. Jumper wires are usually used in low voltage circuits and are generally not suitable for high voltage applications.

Pre-crimp leads are electrical connectors that are pre-crimp onto an electrical circuit board or component to make an electrical connection. They are commonly used in high voltage applications such as in automotive wiring or industrial equipment. The connectors are usually connected with solder and are typically rated for high voltage use. The pre-crimped lead can often be replaced with a soldered lead if necessary, although this may require more time and cost.

0002062101-04-Y0 is a pre-crimp jumper wire. It is an electrical connector designed specifically for use in high voltage applications. The pre-crimp design ensures a secure connection and reduces the risk of electrical shorts. The wire itself is composed of a lead conductor covered in a jacket, which is very durable and resistant to vibration, corrosion, and abrasion. The insulation is also highly resistant to heat and cold. The wire\'s cabling is also designed to be easy to replace if necessary.

The working principle of the 0002062101-04-Y0 is simple. First, the wire is cut to the length required for the circuit. The end of the wire is then crimped onto a connector such as a splice. The connector is then soldered onto the circuit board or component. This creates an electrical connection that will be able to carry the current required by the circuit.

In conclusion, the 0002062101-04-Y0 is a pre-crimp jumper wire that is designed for use in high voltage applications. It is composed of a lead conductor, a durable jacket, and cabling that is designed to be easy to replace. The working principle of the 0002062101-04-Y0 is to first cut the wire to the required length, then crimp the end onto a connector, and last to solder the connector onto the circuit board or component to create an electrical connection.

The specific data is subject to PDF, and the above content is for reference