0002062101-06-W9-D

Series:	1560
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Pin to Pin
Moisture Sensitivity Level (MSL):	--
Length:	6.00" (152.40mm)
Wire Gauge:	18 AWG
Contact Finish:	Tin
Color:	White
Contact Finish Thickness:	20.0µin (0.51µm)
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires, Pre-Crimped Leads and 0002062101-06-W9-D Application Field and Working Principle

Jumper Wires, Pre-Crimped Leads and the 002062101-06-W9-D are important components in many electrical circuits. They are used to allow electricity to be transferred from one point to another with minimal effort. In this article, we will be discussing the different application fields for these components, as well as the various working principles associated with each of them. Jumper Wires are used mostly in the Electronics/Telecom industry. They are typically made from plastic-insulated copper or steel, and come in two varieties: solid and stranded. They are used to bridge the gap between two points that are not on the same circuit board or in the same enclosure. In addition to this, they are also used to join two circuits together, commonly in order to detect short circuiting. Pre-Crimped Leads are used in the Electronics/Telecom industry as well. They are typically constructed from insulated cables and feature a special connector designed to provide electrical connections between two circuits. The connectors typically feature a contacting surface that spreads out the electrical current, thereby eliminating the chance of overheating or shorting out of the circuit components. In order to provide the necessary electrical connection, both sides of the connector must be crimped together; therefore, it is often referred to as a "crimp on" connection.The 0002062101-06-W9-D is a special component used for the purposes of a very specific application. This component features a four-pin configuration, with each pin controlling a different voltage output. It is an ideal component for LED lights and fan bridge circuits, as it can control the voltage output with precision. The pins are numbered one through four, with the fourth pin controlling the highest voltage output and the first pin controlling the lowest. The fourth pin can be used to dim the LED lights or adjust their intensity, whereas the other three pins can be used to turn the fan speed up and down. The way these components work is based on the principles of electrical conductivity. The transmission of electrical current through a circuit requires the support of electrical conductors; in the case of jumper wires and pre-crimped leads, this conductor is the cable itself. The electricity is transmitted through the conductors to reach its destination, and then a connection is made between two different points in the circuit by using the conductors. As for the 0002062101-06-W9-D component, the way it works is slightly different. Instead of conducting electricity, this component works by using a voltage regulator to adjust the output of the current. This regulator works by controlling the amounts of electricity flowing through the pins, thereby regulating the voltage. Overall, Jumper Wires, Pre-Crimped Leads and the 0002062101-06-W9-D component are all extremely useful components in the Electronics/Telecom industry. They allow electricity to be transferred from one point to another with minimal effort, and they can also be used to control the intensity of LED lights and fan bridge circuits. The working principles of these components are based on proper electrical conductivity and voltage control, and are essential to the building of any electrical circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description