0008500113-03-G6-D

Jumper Wires

Jumper wires are short lengths of insulated wires used to make electrical connections between two pieces of equipment or terminals. They are used for permanent connections and are usually soldered or clamped to the connection points. They come in different types, including solid, stranded, braided, or shielded, depending on the type of connection it is being used for.

Jumper wires are typically constructed from copper or copper-clad steel wires that are covered in insulation. The insulation helps to protect the wire from damage and from electrical shorts. The wire can be of any length, ranging from less than an inch to several feet.

Pre-Crimped Leads

Pre-crimped leads are a useful tool when installing electronic components. They are short lengths of insulated wire with a pre-crimped contact or terminal at one end. The contacts are designed to fit into a cavity in the component, and they are held in place by a locking mechanism. Pre-crimped leads make it easier to install components without soldering.

Pre-crimped leads are most commonly used for connecting components to printed circuit boards (PCBs). They are available in a wide range of lengths and colours, and they can also be insulated or uninsulated depending on the application. The contact design can vary depending on the component and the type of PCB being used.

0008500113-03-G6-D application field and working principle

The 0008500113-03-G6-D is a jumper wire with pre-crimped leads that is designed for use in a variety of applications. It can be used for making connections between terminals on electronic components, as well as between two pieces of equipment. The jumper is suitable for applications involving either low or high current and voltage, and it is fully compliant with European Union (EU) RoHS 2.0 Standards.

The jumper wire is constructed from a single, solid copper wire and is covered in an insulating PVC jacket. The ends are fitted with crimped terminals for easy connection. The terminals are designed to provide a reliable connection that is highly resistant to corrosion and vibration. The jumper is designed to ensure a tight fit into terminals for maximum electrical conduction.

The 0008500113-03-G6-D jumper wire can be used in a wide range of applications. It is suitable for making circuit connections between printed circuit boards (PCBs) and electronic components, as well as providing additional jumpers for equipment connections. The jumper can also be used to bridge a gap between two conductors, providing electrical continuity without having to solder them together.

The 0008500113-03-G6-D jumper wire is a reliable and easy-to-use solution for making electrical connections. It provides a secure connection that is resistant to corrosion and vibration, and it is designed to fit securely into terminals for maximum electrical conduction. The jumper is also fully compliant with EU RoHS 2.0 Standards, making it a safe and reliable solution for all types of applications.