0039000038-10-N2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires & Pre-Crimped Leads

Jumper Wires and Pre-Crimped Leads are two types of electrical connections commonly used in the electronics industry. The 0039000038-10-N2 application field and working principle are unique and specific to each type of electrical connection.

Jumper Wires

Jumper Wires are insulated wire pairs often used in prototyping and testing of circuit boards. They consist of two insulated wires which are joined together at one end with a metal element. This metal element can be either a crimped metal contact or a solder connection. Both ends of the wire usually feature a standardized shape such as a pin-shaped connector or a D-shaped connector. Jumper Wires are usually used for simple connections between two components in order to test the functionality of circuits before soldering them permanently.

The 0039000038-10-N2 application field for Jumper Wires is typically used to connect complex, hard-to-reach components on printed circuit boards. This type of connection is preferred for prototyping and testing in order to identify weak points and possible problems before soldering the components onto the board. Furthermore, Jumper Wires are often used as a substitute for soldering components onto a prototype circuit board.

The working principle of Jumper Wires is based on a simple principle: make a temporary connection between two devices or components. This connection is usually not intended to last beyond the testing or prototyping phase. The two insulated wires allow a current to pass through, without introducing any stray elements or signals into the circuit.

Pre-Crimped Leads

Pre-Crimped Leads are short segments of insulated wires that feature a pre-crimped connector on each end. The connectors are typically made from a combination of electrical insulation material and metal elements, such as crimped metal contacts or solder connections. Pre-Crimped Leads are widely used in various electrical and electronic applications, since they offer a reliable connection and a high degree of flexibility, as they can easily be routed around objects to reach desired locations. Furthermore, the connectors on both ends of the Pre-Crimped Lead are usually standardized, which means they are compatible with a wide variety of connectors.

The 0039000038-10-N2 application field for Pre-Crimped Leads is mainly used in wiring applications for connecting together several circuits. They are used to join two circuit boards together without the need for manual wiring and soldering. Furthermore, Pre-Crimped Leads are often used to create an electrical link between one circuit board and another, or a circuit board and a power supply. Additionally, Pre-Crimped Leads are often used to join components to the mains supply, and are also a popular choice for domestic applications, such as light switches.

The working principle of Pre-Crimped Leads is based on the same basic principle as Jumper Wires - create a simple, temporary connection between two devices or components. The key difference between the two types of connections is in the pre-crimped connectors which feature standardized contacts, as mentioned above. This allows for a higher degree of reliability, as the connectors are able to fit into the mating connector without any risks of short circuit or misalignment.

Conclusion

Jumper Wires and Pre-Crimped Leads are two popular types of electrical connections which are used in a variety of applications. The 0039000038-10-N2 application field and working principle of each of these types of connections is unique and specific to it. Jumper Wires are mainly used to make temporary connections between components in order to test them, while Pre-Crimped Leads are often used to join multiple circuits together.

The specific data is subject to PDF, and the above content is for reference