0039000038-11-R2

Jumper Wires

Jumper wires, also known as jumpers, are short length flat wires with either crimp or solder terminals at each end. They are used to connect two points on an electrical circuit, usually in order to test or troubleshoot. Jumpers are manufactured in many gauges and with different types of insulation and terminations. Typical insulation materials include PVC, PTFE, and Kynar, while typical terminations include crimp or solder tabs.

When using jumper wires, one end of the wire is connected to the device that needs to be tested, such as a circuit board, and the other end is attached to a suitable source of power or ground. The jumper wire then acts as a bridge, allowing current to flow freely between the two points. Depending on the application, multiple jumper wires may be needed to complete the connection.

Pre-Crimped Leads

Pre-crimped leads are prepared wires with pre-installed crimp terminals that are designed to make the connection or termination of electrical components easier and quicker. They are available in various gauge sizes and have a variety of insulation and termination styles. Pre-crimped leads are often used for wiring harnesses and other electrical assemblies, as well as for test applications.

Pre-crimped leads require a special crimp tool to make the connection. To attach the pre-crimped lead, the crimp tool should be placed in the appropriate position and the lead should be inserted into the required terminal. The crimp tool is then used to crimp the terminal to the wire. It is important to ensure that the connection is completed properly to ensure an effective and reliable connection.

003900038-11-R2 Application Field and Working Principle

The 003900038-11-R2 is a type of jumper wire and pre-crimped lead manufactured by Sineco. It is specifically designed to be used in custom-built assemblies and wiring harnesses, as well as for various test and maintenance applications. It has a 20 AWG (American Wire Gauge) rating and is constructed out of UL (Underwriter\'s Laboratories) approved materials.

The 003900038-11-R2 features insulated crimp terminals at either end and is available in a range of lengths, with the standard length being 11 inches. The insulation material used for this jumper wire is a high-temperature grade PVC. The insulation provides protection from electrical shock and also ensures that the connection is secure.

To ensure reliable electrical contact, the 003900038-11-R2 utilizes a crimp terminal at each end, allowing for quick and easy connection to other components. The pre-crimped lead also provides protection against vibration and corrosion, which increases its durability and reliability. This jumper wire also features a UL rating of 600V, which indicates that it is safe to use in most electrical systems.

The 003900038-11-R2 provides a quick and reliable connection between components, making it an ideal solution for custom-built electrical assemblies and wiring harnesses. It is also well suited for test and maintenance applications, where a reliable and secure connection is needed. In addition, the UL rating ensures that the jumper wire is safe to use in most electrical systems.