0039000040-04-R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are a type of connecting wire typically used for prototyping and to connect two components of a circuit without soldering. They are available in a variety of gauges and lengths, usually made from copper or aluminum. The ends of a jumper wire are often insulated for safety reasons. Typically they feature a two-pin system, with two notches that allow the jumper to hook onto a circuit board for easy connections.

Pre-Crimped Leads

Pre-crimped leads are similar to jumper wires, but they are made with an already-crimped connection. These leads are designed to be connected together quickly and easily, often using a specialized crimping tool. The pre-crimping helps to ensure a more secure connection between wires. Pre-crimped leads are available in a range of lengths and gauge sizes, as well as different types of insulation.

0039000040-04-R0 Application Field and Working Principle

The 0039000040-04-R0 is designed specifically for use as part of jumper wire and pre-crimped lead assemblies. It is a micro-controller-based, two-channel, four-wire interconnect system, meaning it requires two signals to operate the connection. The signal sent to the micro-controller pins is regulated by a timer circuit, ensuring that there is an up-to-date and secure connection when the two components are connected.

The conductor is a 4-pin shielded system, with two ground pins, an enable input pin, and a signal output pin. The shield ensures that the signal remains secure and prevents any outside interference from affecting the connection. The enable signal is required in order for the interface to work, and is often sent through a manual toggle switch. Once enabled, the system is able to regulate the signal as needed.

The 0039000040-04-R0 is designed to be used in a variety of applications, including connecting jumper wires and pre-crimped leads. The system is able to accurately sense and respond to any voltage changes along the conductor, ensuring that the two components remain securely connected. The system is also designed to be used with a variety of different conductor sizes, allowing it to be used in a variety of different applications.

In order to operate correctly, the 0039000040-04-R0 must be wired correctly. Once the enable switch is activated, the micro-controller sends the necessary signals to the conductor in order to regulate the connection between the two components. The system then responds to any voltage variation along the conductor, ensuring that the connection remains secure. The system is designed to work with both jumper wires and pre-crimped leads, ensuring that the connection is not affected by any wear or tear along the wire.

The specific data is subject to PDF, and the above content is for reference