0039000181-03-Y2-D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are small electrical conductors used to connect two points in an electrical circuit. They are commonly used in prototyping and testing, and can be purchased in wide variety of forms such as pre-crimped leads, crimp sleeves, mini wire loops, double ended pins, or individual wires. The individual wires are generally the most common form and are usually composed of multiple strands of flexible insulation material covered in a sheet of metal. Jumper wires come in various lengths and can be used to bridge small or large distances between components.

Pre-Crimped Leads

Pre-crimped leads are jumper wires that have their ends pre-attached to each end of the wire. This eliminates the need for manually crimping the connections, which saves time during set up and installation. Pre-crimped leads come in various lengths with an assortment of insulation types, and can be an efficient and cost effective solution for prototyping or when standard connector\'s won\'t reach.

0039000181-03-Y2-D Application Field and Working Principle

The 0039000181-03-Y2-D is a double ended pre-crimped lead jumper wire that is designed for general use in low profile applications. The connector on each end is made from an insulated metal sleeve with a diameter of 2mm and a length of 8.3mm. The wire itself is composed of flexible, stranded conductor with an insulated jacket made from polyurethane. The working principle of this jumper wire is very simple; an electrical current runs through the wire which serves to connect two points in an electrical circuit.

The 0039000181-03-Y2-D is suitable for a wide range of applications including automotive, medical, industrial, and consumer electronics. It can be used in low profile applications, where the extra insulation may be beneficial, or in areas where a standard connector may need to be extended. Depending on the intended application, the Y2-D jumper wire can be used in either a push-on or screw-on connection.

When using the 0039000181-03-Y2-D jumper wire, it is important to ensure that all connections are properly crimped and that the insulation is intact. Be sure to use a proper crimping tool and check that the barrel is the correct size for the application. Before and after crimping, the resistance should be checked using an ohm meter. The proper connection should have a low ohm reading, indicating that the connection is sufficient.

The specific data is subject to PDF, and the above content is for reference