0039000181-06-V0-D

Series:	Mini-Fit® Jr™
Part Status:	Active
Lead Free Status / RoHS Status:	--
Contact End:	Socket to Socket
Moisture Sensitivity Level (MSL):	--
Length:	6.00" (152.40mm)
Wire Gauge:	20 AWG
Contact Finish:	Gold
Color:	Violet
Contact Finish Thickness:	30.0µin (0.76µm)
Number of Rows:	1
Number of Conductors:	1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper wires, pre-crimped leads, and 0039000181-06-V0-D application field and working principle are all integral categories in the world of electrical engineering. Jumper wires are pieces of insulated metal wire that are used to connect two remote points. They enable a circuit to interact with another circuit which would be otherwise out of reach. Pre-crimped leads are jumpers that are already crimped to a wire size of the appropriate diameter. This comes in handy when replacing factory wiring or in prototyping a circuit.The 0039000181-06-V0-D application field and working principle can provide insight into the function and design of a circuit. This application is geared toward devices that need to be connected to a voltage source. This includes sensors, motors, and relays. The working principle allows the electrical current to use different paths to carry the voltage to its destination. In short, it helps optimize the current\'s path of travel.The 0039000181-06-V0-D is composed of a power cable, a fuse, and a connector. The power cable is the part that actually connects the power source to the device. The fuse prevents an overload from causing permanent damage to the circuit. The connector serves to provide a connection between the cables and the device in order to make the circuit complete. Once all of these components are in place, a voltage amplifier is then used to further enhance the performance of the circuit.A more detailed description of the working principle of the 0039000181-06-V0-D can provide a better understanding of the underlying technology at work. The voltage amplifier, which is part of the system, is crucial to the performance of the circuit. The amplifier helps boost the voltage that is taken from the power source and then passes it along to the device. The increased voltage helps to ensure that the correct amount of power is present to properly operate the device.The actual process of hooking up a device to the circuit begins by connecting the respective power cables to the appropriate endpoints within the circuit. The fuse must then be installed to the power wire, and if necessary, the connector must also be hooked up as well. After this is done, the voltage amplifier is used to increase the voltage coming from the power source. This result should be monitored at all times to ensure the proper voltage is being sent to the device.Once the connections have been made, the power source should be turned on. At this point, the device should begin to operate normally. Any ensuing troubleshooting should be done with caution as this could cause more harm than good. If done properly, the device should run without any issues. It is worth noting that it is also important to monitor the temperature of the power source as having a higher temperature than usual can cause the device to fail.Jumper wires, pre-crimped leads, and the 0039000181-06-V0-D are essential components in electrical engineering. Each of them serves a unique purpose and should be handled carefully in order to yield the expected results. With proper knowledge and understanding, the combination of these components should produce a circuit that is both efficient and reliable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description